Dnia 20-12-2010 o 00:49:26 Jesse Gross <je...@nicira.com> napisał(a):
On Sun, Dec 19, 2010 at 3:00 PM, Admin HRD.pl <ad...@hrd.pl> wrote:
Hi All
Can I do something like this?
I have one NIC eth0
And create tree vif0, vif1, vif2
Create br0
+--------|eth0|--------+
| |
| br0 |
| |
+-|vif0|-|vif1|-|vif2|-+
eth0 didn't have ip
br0 didn't have ip
vif0..2 have ip (this is a external IP not NAT)
193.x.0.100
193.x.0.101
193.x.0.102
GW is 193.x.0.1
Subnet /24
How create routing table for openvswitch interfacess and how set
gateway in
routing table correctly ?
You need to set up the routing table in the VMs. Open vSwitch is not
doing any routing, only switching. It's the same as if you had a
number of machines connected to a physical Ethernet switch.
Thank you for response.
But i use openvswitch not for VM but for services on host where is
installed openvswitch.
I want to create aa pair of of interfaces , one for each service and use
the sFlow or NetFlow ,to count bandwidth consumption.
Tom
_______________________________________________
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss_openvswitch.org
