daniel gessel wrote: > The tool "drm_info" will report details on available modes > (and much more) if you have relatively modern graphics > drivers. The package name has a hyphen instead of an > underscore: "drm-info".
installed drm_info and got this: Node: /dev/dri/card0 ├───Driver: simpledrm (DRM driver for simple-framebuffer platform devices) version 1.0.0 (20200625) │ ├───DRM_CLIENT_CAP_STEREO_3D supported │ ├───DRM_CLIENT_CAP_UNIVERSAL_PLANES supported │ ├───DRM_CLIENT_CAP_ATOMIC supported │ ├───DRM_CLIENT_CAP_ASPECT_RATIO supported │ ├───DRM_CLIENT_CAP_WRITEBACK_CONNECTORS supported │ ├───DRM_CAP_DUMB_BUFFER = 1 │ ├───DRM_CAP_VBLANK_HIGH_CRTC = 1 │ ├───DRM_CAP_DUMB_PREFERRED_DEPTH = 24 │ ├───DRM_CAP_DUMB_PREFER_SHADOW = 0 │ ├───DRM_CAP_PRIME = 3 │ ├───DRM_CAP_TIMESTAMP_MONOTONIC = 1 │ ├───DRM_CAP_ASYNC_PAGE_FLIP = 0 │ ├───DRM_CAP_CURSOR_WIDTH = 64 │ ├───DRM_CAP_CURSOR_HEIGHT = 64 │ ├───DRM_CAP_ADDFB2_MODIFIERS = 1 │ ├───DRM_CAP_PAGE_FLIP_TARGET = 0 │ ├───DRM_CAP_CRTC_IN_VBLANK_EVENT = 1 │ ├───DRM_CAP_SYNCOBJ = 0 │ └───DRM_CAP_SYNCOBJ_TIMELINE = 0 ├───Device: platform simple-framebuffer │ └───Available nodes: primary ├───Framebuffer size │ ├───Width: [1024, 4096] │ └───Height: [768, 4096] ├───Connectors │ └───Connector 0 │ ├───Object ID: 35 │ ├───Type: unknown │ ├───Status: connected │ ├───Physical size: 270x203 mm │ ├───Subpixel: unknown │ ├───Encoders: {0} │ ├───Modes │ │ └───1024x768@60.00 preferred driver │ └───Properties │ ├───"EDID" (immutable): blob = 0 │ ├───"DPMS": enum {On, Standby, Suspend, Off} = On │ ├───"link-status": enum {Good, Bad} = Good │ ├───"non-desktop" (immutable): range [0, 1] = 0 │ ├───"TILE" (immutable): blob = 0 │ └───"CRTC_ID" (atomic): object CRTC = 33 ├───Encoders │ └───Encoder 0 │ ├───Object ID: 34 │ ├───Type: none │ ├───CRTCS: {0} │ └───Clones: {0} ├───CRTCs │ └───CRTC 0 │ ├───Object ID: 33 │ ├───Legacy info │ │ ├───Mode: 1024x768@60.00 preferred driver │ │ └───Gamma size: 0 │ └───Properties │ ├───"ACTIVE" (atomic): range [0, 1] = 1 │ ├───"MODE_ID" (atomic): blob = 39 │ │ └───1024x768@60.00 preferred driver │ ├───"OUT_FENCE_PTR" (atomic): range [0, UINT64_MAX] = 0 │ └───"VRR_ENABLED": range [0, 1] = 0 └───Planes └───Plane 0 ├───Object ID: 31 ├───CRTCs: {0} ├───Legacy info │ ├───FB ID: 38 │ │ ├───Object ID: 38 │ │ ├───Size: 1024x768 │ │ ├───Format: XRGB8888 (0x34325258) │ │ ├───Modifier: DRM_FORMAT_MOD_LINEAR (0x0) │ │ └───Planes: │ │ └───Plane 0: offset = 0, pitch = 4096 bytes │ └───Formats: │ └───XRGB8888 (0x34325258) └───Properties ├───"type" (immutable): enum {Overlay, Primary, Cursor} = Primary ├───"FB_ID" (atomic): object framebuffer = 38 │ ├───Object ID: 38 │ ├───Size: 1024x768 │ ├───Format: XRGB8888 (0x34325258) │ ├───Modifier: DRM_FORMAT_MOD_LINEAR (0x0) │ └───Planes: │ └───Plane 0: offset = 0, pitch = 4096 bytes ├───"IN_FENCE_FD" (atomic): srange [-1, INT32_MAX] = -1 ├───"CRTC_ID" (atomic): object CRTC = 33 ├───"CRTC_X" (atomic): srange [INT32_MIN, INT32_MAX] = 0 ├───"CRTC_Y" (atomic): srange [INT32_MIN, INT32_MAX] = 0 ├───"CRTC_W" (atomic): range [0, INT32_MAX] = 1024 ├───"CRTC_H" (atomic): range [0, INT32_MAX] = 768 ├───"SRC_X" (atomic): range [0, UINT32_MAX] = 0 ├───"SRC_Y" (atomic): range [0, UINT32_MAX] = 0 ├───"SRC_W" (atomic): range [0, UINT32_MAX] = 1024 ├───"SRC_H" (atomic): range [0, UINT32_MAX] = 768 ├───"IN_FORMATS" (immutable): blob = 32 │ └───DRM_FORMAT_MOD_LINEAR (0x0) │ └───XRGB8888 (0x34325258) └───"FB_DAMAGE_CLIPS" (atomic): blob = 41 don't know what to do. tia, ole dan j. daniel moylan 84 harvard ave brookline, ma 02446-6202 617-777-0207 (cel) j...@moylan.us www.moylan.us [BLM] _______________________________________________ Discuss mailing list Discuss@lists.blu.org http://lists.blu.org/mailman/listinfo/discuss