Thanks, I'll check it out. On Thu, 8 Aug 2024, 1:09 pm Marcus Müller, <mmuel...@gnuradio.org> wrote:
> Hi Sourya, > > that is a different thing than you asked about originally :) > > But in this case, this is "just" a matter of phase synchronizing different > USRPs. See > http://kb.ettus.com (and the Application notes there) on how, and for > which specific USRP > types, that can be achieved. All the things described there translate to > GNU Radio. > > Best, > Marcus > > On 08.08.24 18:47, Sourya Saha wrote: > > Hi Marcus, > > By synchronized, I mean synchronization in phase and clock. I am not > worrying about the > > CSI estimate because I can get that through the gr-ieee802-11 module > itself. I am worried > > about phase and clock synchronizing 2 different USRPs in GNURadio. I do > know that an > > octoclock can be used. But is there any other way to do it without any > external hardware? > > > > On Thu, Aug 8, 2024 at 12:44 PM Marcus Müller <mmuel...@gnuradio.org > > <mailto:mmuel...@gnuradio.org>> wrote: > > > > Hi, > > can you elaborate what you mean with "synchronized"? A CSI estimate > can only happen when > > the necessary pilots have been observed, and that will, due to > finite speed of light, > > necessarily happen at different times at different receivers. > > > > Best, > > Marcus > > > > On 08.08.24 18:19, Sourya Saha wrote: > > > Hi. > > > I am working on an application which utilises the gr-ieee802-11 > module. I need to > > collect > > > readings from 2 receivers. However, I want them synchronised. > What would be the > > best way > > > to do that in GNURadio? > > >
