The main method is defined beginning on line 216 and called 4 times on
lines 36-39.
And it appears the configparser is throwing the NoSectionError.
Try commenting out line 36 to see if line 37 throws the same exception.
When you said is has run before, did it run under python3.9?
-- Cinaed
On 12/11/22 19:11, Elmore Family wrote:
I have attached the 2 files in question. Look at the beginning of
run_response.py. It uses ConfigParser to access the ft8_qso.conf
configuration file.
This line seems to be the problem: my_call = str(parser.get('main',
'my_call_sign')).
But ‘main’ is a section in the ft8_qso.conf file. Why can’t it find
‘main’?
Jim
*From:* Cinaed Simson
*Sent:* Sunday, December 11, 2022 8:52 PM
*To:* Elmore Family
*Cc:* discuss-gnuradio@gnu.org
*Subject:* Re: Import error using an OOT
The problem appears to be in the python code
response.py
- there is no 'main()' method.
-- Cinaed
On 12/11/22 09:48, Elmore Family wrote:
Here is the result:
pi@raspberrypi:~ $ python3
Python 3.9.2 (default, Mar 12 2021, 04:06:34)
[GCC 10.2.1 20210110] on linux
Type "help", "copyright", "credits" or "license" for more information.
>>> import ft8
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/usr/local/lib/python3.9/dist-packages/ft8/__init__.py", line
23, in <module>
from .run_response import run_response
File "/usr/local/lib/python3.9/dist-packages/ft8/run_response.py",
line 36, in <module>
my_call = str(parser.get('main', 'my_call_sign'))
File "/usr/lib/python3.9/configparser.py", line 781, in get
d = self._unify_values(section, vars)
File "/usr/lib/python3.9/configparser.py", line 1149, in _unify_values
raise NoSectionError(section) from None
configparser.NoSectionError: No section: 'main'
Jim
*From:* Cinaed Simson
*Sent:* Sunday, December 11, 2022 12:15 AM
*To:* discuss-gnuradio@gnu.org
*Subject:* Re: Import error using an OOT
Type
python3
then enter
import ft8
and see if it works.
-- Cinaed
On 12/9/22 18:33, Elmore's wrote:
I have created an OOT which when I incorporate it in my flowgraph
shows the following error:
Failed to evaluate import expression ‘import ft8’
The yaml file is:
id: ft8_run_response
label: ft8
category: '[ft8]'
templates:
imports: import ft8
make: ft8.run_response(${ft8_button})
callbacks:
- set_ft8(${ft8_button})
# Make one 'parameters' list entry for every parameter you want
settable from the GUI.
# Keys include:
# * id (makes the value accessible as keyname, e.g. in the make
entry)
# * label (label shown in the GUI)
# * dtype (e.g. int, float, complex, byte, short, xxx_vector, ...)
# * default
parameters:
- id: ft8_button
label: ft8_button
dtype: raw
default: 0
# 'file_format' specifies the version of the GRC yml format used in
the file
# and should usually not be changed.
file_format: 1
I have developed and used an OOT before without an issue. I looked
at the previous OOT and reviewed the GNU Radio docs on OOTs without
seeing anything different.
I am using Python 3.92 with GNU radio 3.9.4.0 on a Raspberry Pi.
I hope someone can show me the error of my ways.
Jim
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
Virus-free.www.avg.com
<http://www.avg.com/email-signature?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient>
