On 2/10/20 3:11 AM, kron...@tiscali.it wrote: > Hi Ron! > your flags solved the specific error. > The error on stdlib.h still occurs. > Ivan
Hi Ivan - I've seen that error before. Try changing the include file name to #include <cstdlib> since it's bombing in C++ code. -- Cinaed the #include_next doesn't care if it's if it's an absolute path. > > Il 10.02.2020 11:25 Ron Economos ha scritto: > >> For the "selected processor does not support `pld [aVector,#128]' in ARM >> mode" error, you can try adding these flags to the cmake command line. >> >> -DCMAKE_CXX_FLAGS:STRING="-march=armv7-a -mfloat-abi=hard -mfpu=neon >> -mtune=cortex-a9" -DCMAKE_C_FLAGS:STRING="-march=armv7-a >> -mfloat-abi=hard -mfpu=neon -mtune=cortex-a9" >> -DCMAKE_ASM_FLAGS:STRING="-march=armv7-a -mfloat-abi=hard -mfpu=neon >> -mtune=cortex-a9 -g" >> >> Ron >> >> On 2/10/20 00:56, kron...@tiscali.it <mailto:kron...@tiscali.it>wrote: >>> Dear all, I'm compiling GNU Radio 3.8 for E310 using the newer file >>> system and SDK. Cmake runs smoothly, but when I compile I can see >>> mainly two errors: - stdlib.h not found: this is impossible, because >>> I can find it in the sysroot of the SDK. - "selected processor does >>> not support `pld [aVector,#128]' in ARM mode" and something similar. >>> The output of cmake and make can be found here: >>> https://pastebin.com/feyfpgUV Do you know how I can fix these errors? >>> Thanks so much. Ivan > > > > Con Tiscali Mobile Smart 30 4G hai minuti illimitati, 100 SMS e 30 Giga > in 4G a soli 8,99€ al mese. http://tisca.li/smart30 >
