On Thu, 14 Nov 2019 19:35:13 +0000 Chris Vine <vine35792...@gmail.com> wrote: > The original poster can get some information from installing soapy and > doing 'SoapySDRUtil --probe'.
I should probably have appended what the probe tells me about my RSP1A, which may or may not apply to his: ---------------------------------------------------- -- Device identification ---------------------------------------------------- driver=SDRplay hardware=RSP1A mir_sdr_api_version=2.130000 mir_sdr_hw_version=255 serial=xxxxxxxxxxx ---------------------------------------------------- -- Peripheral summary ---------------------------------------------------- Channels: 1 Rx, 0 Tx Timestamps: NO Other Settings: * RF Gain Select - RF Gain Select [key=rfgain_sel, default=4, type=string, options=(0, 1, 2, 3, 4, 5, 6, 7, 8, 9)] * IF Mode - IF frequency in kHz [key=if_mode, default=Zero-IF, type=string, options=(Zero-IF, 450kHz, 1620kHz, 2048kHz)] * IQ Correction - IQ Correction Control [key=iqcorr_ctrl, default=true, type=bool] * AGC Setpoint - AGC Setpoint (dBfs) [key=agc_setpoint, default=-30, type=int, range=[-60, 0]] * BiasT Enable - BiasT Control [key=biasT_ctrl, default=true, type=bool] * RfNotch Enable - RF Notch Filter Control [key=rfnotch_ctrl, default=true, type=bool] * DabNotch Enable - DAB Notch Filter Control [key=dabnotch_ctrl, default=true, type=bool] ---------------------------------------------------- -- RX Channel 0 ---------------------------------------------------- Full-duplex: NO Supports AGC: YES Stream formats: CS16, CF32 Native format: CS16 [full-scale=32767] Antennas: RX Corrections: DC removal Full gain range: [0, 48] dB IFGR gain range: [20, 59] dB RFGR gain range: [0, 9] dB Full freq range: [0.01, 2000] MHz RF freq range: [0.01, 2000] MHz CORR freq range: MHz Sample rates: 0.25, 0.5, 1, 2, 2.048, 6, 7, 8, 9, 10 MSps Filter bandwidths: 0.2, 0.3, 0.6, 1.536, 5, 6, 7, 8 MHz