Hello Kyeong,
Again thank you so much for helping. And yes my idea is generation IQ
modulated signal to feed through the SDR board.
However, to sooner or later I may need to build the block by myself. I have
worked with but as you know its failed to generate. Can you tell me any
following tutorial to generate the block?
Yes, I think the delay was the case to correct. However, as you used
constellation modulator why we cannot do with demodulator block? Is there
any reason? Sorry for the late reply. Looking forward to hearing from you.
Thank you so much.
Sincerely,
Atiqur
On Sat, Jun 29, 2019 at 12:13 PM Kyeong Su Shin <kss...@postech.ac.kr>
wrote:
>
> Hello Atiqur:
>
>
> If all you want is writing a simple DQPSK transceiver, then you can use a
> Constellation Decoder block, as like in the attached file. I cannot comment
> much on the problems that you are experiencing, as I have not looked on the
> source codes that you are trying to build.
>
>
> Please note that you may have to change numbers in the "delay" block at
> the end of the flow graph to get a correct plot. This is because the
> synchronizer and the equalizer blocks in the flow graph may end up adding a
> few numbers to the stream, and introduce "time differences" between the two
> streams.
>
>
> Also, please add the mailing list ('discuss-gnuradio.gnu.org') as a
> recipient when replying to the e-mail thread, as this discussion
> could useful for other people as well.
>
>
> Regards,
>
> Kyeong Su Shin
> ------------------------------
> *보낸 사람:* Md. Atiqur Rahman <atiq....@gmail.com>
> *보낸 날짜:* 2019년 6월 29일 토요일 오전 5:23:59
> *받는 사람:* Kyeong Su Shin
> *제목:* Re: [Discuss-gnuradio] PSK modulation and demodulation from gnu
> radio tutorial.
>
> Hello Kyeong,
> First of thank you so much for your quick reply. From the tutorial one, I
> am following all section. Unfortunately, from gnuradio with python, I am
> facing problems. I made the multiply block and its working but when I try
> to make the qpsk_demod_py_cb it is not working. I have tried to do the
> same tutorial so many times. Then I shifted to do the oot module by c++.
> Sometime in the tutorial, some file name changed. Like tutorial with c++ I
> am working now, my lib/ folder files like .h and .cc edited successfully
> but for making test: in my python/ folder qa_my_qpsk_demod_cd.py is present
> but in the tutorial it's named is qa_qpsk_demod.py!!!! However, I made the
> change .xml file and .py as suggested but still not working. When I do the
> make test it says tutorial passed but qa_qpsk_demod failed! I make the test
> and it failed again and again. Honestly, I don't know what I am doing wrong!
>
> I do even see the source code from github and yet their file name is also
> changed!
>
> All I wanted to do the generating the PSK signal (transceiver). I have
> failed for the last 3 weeks! Please would you give me some solutions here?
> I will be so grateful. Thank you.
>
> Sincerely,
> Atiqur
>
>
> On Fri, Jun 28, 2019 at 4:32 PM Kyeong Su Shin <kss...@postech.ac.kr>
> wrote:
>
> Hello Atiqur,
>
>
> The "PSK Demod" that you added into your flowgraph is deprecated, and is
> no longer supported. It is kept there for the backward-compatibility, but
> it is not guaranteed to work and will be removed in future. Also, that
> block does the synchronization and the equalization by itself, so you must
> remove the preceeding synchronization and equalization blocks if you
> actually want to use that (you shouldn't, though). Try other blocks, like a
> Constellation Decoder or a custom Python block.
>
>
> Channel Model is used to "degrade" the signal (for simulation purposes).
> It will apply a FIR filter to the incoming signals to simulate the
> multipath environment. The taps are the filter taps used for that purpose.
> It is just a sequence of a few random non-zero numbers to simulate the
> multipath effect, and shouldn't really affect the functionality of the
> synchronizer and the equalizer blocks. A good equalizer will cancel out the
> effect of those channel taps.
>
>
> Regards,
>
> Kyeong Su Shin
>
>
> ------------------------------
> *보낸 사람:* Md. Atiqur Rahman <atiq....@gmail.com> 대신 Discuss-gnuradio
> <discuss-gnuradio-bounces+ksshin=postech.ac...@gnu.org>
> *보낸 날짜:* 2019년 6월 28일 금요일 오후 9:32:46
> *받는 사람:* discuss-gnuradio@gnu.org
> *제목:* [Discuss-gnuradio] PSK modulation and demodulation from gnu radio
> tutorial.
>
> Hello Guys,
> I am very much new in gnu radio and trying to do the tutorial that
> gnuradio published for PSK demodulation. I am using constellation modulator
> to modulate the signal and demodulate it by PSK demodulation block(not my
> QPSK demodulator). I did put every parameter as they suggested.
> Unfortunately, I do not get the same result(synchronized input and output
> ). I think its may the Channel model or time recovary block is not set
> correctly. Moreover, I do not understand why they use the channel model
> taps parameter to [1.0, 0.25-0.25j, 0.50 + 0.10j, -0.3 + 0.2j]? How did the
> get that? I did already spend a lot of time for searching about these but
> do not get any specific understandable solution.
>
> I attach my .grc file in this mail. Please have a look. Looking forward to
> hearing from you guys.
>
> Sincerely,
> Atiq
>
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
