On 10/18/2018 04:26 PM, Christian BusquielSanz wrote: >> If the BER icon is grey, you need to put your cursor on the BER icon, >> right click, and select enable. >> >> And you need to do the same thing for the two yellow icons for the CRC32 >> if you haven't already done so. >> >> All the icons in the flowgraph should have a white background. > > I did not mean that > I saw that the flowgraph that you sent me had several blocks in grey and > several blocks in yellow > I researched what it meant, since it did not show up in any tutorial, > and I noticed that feature > "Enable" (Light purple): block working > "Disabled" (Dark Grey): block does not exist for the flowgraph, but its > connections are still there. (Useful for sinks) > "Bypass" (Yellow): block behaves as it is only a connection between blocks > > What I meant is what I see as an attached picture No_BER_Shown_001.png > I have to click on the Range value, change it from 2 to another value > (Either clicking the arrow up or down) and then the BER starts to being > plotted > When I do that, results are shown in the BER graph
Maybe you removed the Delay slider? The default value is 0 - try setting it to 2 in the Qt GUI Range. -- Cinaed _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
