====================================================================== Ettus Research will be running a series of free, hands-on, technical workshops in Washington D.C. area, and you are welcome to attend!
Tuesday March 20 -- GNU Radio Workshop Wednesday March 21 -- RFNoC Workshop Thursday March 22 -- GNU Radio Workshop Friday March 23 -- RFNoC Workshop Each workshop is being run twice, in two identical sessions. All workshops will run from 09:00 to 17:00. Breakfast and set-up will begin at 08:30. All workshops will be held at the address listed below. National Instruments 7125 Thomas Edison Drive, Suite 200 Columbia, Maryland, 21046, USA ====================================================================== Workshop Description: Full Title: Introduction to the USRP, UHD, and GNU Radio (Open-Source Toolchain) Abstract: This workshop will provide a thorough and practical introduction to the USRP hardware and the open-source software toolchain (UHD and GNU Radio). We will examine the hardware and architecture of the entire USRP family of software-defined radios. We will discuss topics such as how to get started using a new USRP device, how to install and configure the open-source software toolchain, programming the USRP using the UHD API from C++, using GNU Radio with the USRP and creating and running flowgraphs, using GNU Radio from both GRC and Python, and various debugging techniques. Several exercises will be performed, such as implementing an FM transmitter and receiver. Various demonstrations of wireless systems will be shown. A discussion of the embedded E310 radio and using embedded SDR will be included. Several other open-source tools will be discussed, such as GQRX, Fosphor, Inspectrum, and several Out-of-Tree (OOT) modules. A discussion of cellular applications, including OpenBTS and LTE stacks, as well as GPS/GNSS applications will be presented. Several other miscellaneous topics such as 10 Gigabit Ethernet networking, host system performance tuning, X300/X310 device recovery, and some best practices will be discussed. Attendees should come away with a solid foundation and practical understanding of how to configure, program, and use the USRP to implement a wide range range of wireless systems. ====================================================================== Workshop Description: Full Title: FPGA Programming on the USRP with the RFNoC Framework Abstract: Ettus Research's RFNoC (RF Network-on-Chip) software framework is designed to decrease the development time for experienced FPGA engineers seeking to integrate IP into the USRP FPGA signal processing chain. RFNoC is the framework for USRP devices that use Xilinx 7-series FPGAs (E310, E312, X300, X310). RFNoC is built around a packetized network infrastructure in the FPGA that handles the transport of control and sample data between the host CPU and the radio. Users target their custom algorithms to the FPGA in the form of Computation Engines (CE), which are processing blocks that attach to this network. CEs act as independent nodes on the network that can receive and transmit data to any other node (e.g., another CE, the radio block, or the host CPU). Users can create modular, FPGA-accelerated SDR applications by chaining CEs into a flow graph. RFNoC is supported in UHD and GNU Radio. In this workshop, we will present an interactive hands-on tutorial on RFNoC, including a discussion on its design and capabilities, demonstrations of several existing examples, and a walk-through on implementing a user-defined CE and integrating the CE into GNU Radio. ====================================================================== Details and Logistics: * The workshops are free, technical, and hands-on. * Each day, coffee/donuts/bagels will be provided at 08:30, as well as lunch at around 12:00, and an afternoon snack. * In both workshops, both laptop computers and USRP radios will be provided for use. Attendees do not need to bring or prepare anything. * For the USRP/GNU Radio Workshop, attendees should have some previous experience with Linux and using the Linux command line, and basic familiarity with a programming language such as C, C++, or Python, and basic fundamental concepts in DSP and RF. For the RFNoC Workshop, attendees should also have some basic familiarity with Verilog. Extensive or deep experience with these topics is not necessary. * Space is limited and will be allocated on a first-come, first-serve basis. * Registration is required in advance, but is completely free. * To register, please send an email to "supp...@ettus.com". Please specify your: (1) full name; (2) email address; (3) telephone number; (4) company/university/organization; and (5) which workshop(s) you would like to attend (one of the two GNU Radio sessions, and/or one of the two RFNoC sessions). Please use the subject line: "Workshop Registration". * We will reply within 24 hours and confirm your registration. You are not considered to be registered until you have received the confirmation email. * Your registration information will be kept private, and will not be shared with any third-party whatsoever. * If you need to modify or cancel your registration, or if you have any questions/concerns, then please email us at "supp...@ettus.com". * We look forward to seeing you there!! ======================================================================
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
