This is also my experience, I made exactly this, deleting the build dir, make a new one, fresh cmake, and so on.
Ralph. > -----Original Message----- > From: [email protected] [mailto:[email protected]] > Sent: Saturday, 20 May, 2017 20:50 > To: Ralph A. Schmid, dk5ras; 'Kostis Triantafyllakis'; > [email protected] > Subject: Re: [Discuss-gnuradio] Building gnuradio master fails > > Be that as it may, I have noticed that the first "cmake../", that is a fresh > directory, produces different output than a "make clean" followed by "cmake > ../". I've made it a point to do a "rm -r build". > > By output, I means whatever is written to standard output. I don't know if a > fresh directly effects the actual build or not. > > Original Message > From: Ralph A. Schmid, dk5ras > Sent: Saturday, May 20, 2017 11:32 AM > To: 'Kostis Triantafyllakis'; [email protected] > Subject: Re: [Discuss-gnuradio] Building gnuradio master fails > > Hi, > > Forgot to mention that of course I already did so - with no success... > > Ralph. > > > -----Original Message----- > > From: Kostis Triantafyllakis [mailto:[email protected]] > > Sent: Saturday, 20 May, 2017 18:19 > > To: Ralph A. Schmid, dk5ras; [email protected] > > Subject: Re: [Discuss-gnuradio] Building gnuradio master fails > > > > Hello, > > > > Cleaning (or even deleting the whole build directory) before rebuilding, > > had helped me in similar cases. > > Maybe you could give it a try > > > > Best, > > Kostis > > > > > > On 05/20/2017 06:58 PM, Ralph A. Schmid, dk5ras wrote: > > > Hi, > > > > > > on a Kubuntu 16.04 system building gnuradio from source fails. Branch is > > > master, downloaded right now. > > > > > > UHD is also the latest version from right now. > > > > > > Any ideas what it could be? Here the output: > > > > > > > > > [ 99%] Built target _trellis_swig1 > > > [ 99%] Building CXX object > > > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o > > > > > > [ 99%] Built target _trellis_swig0 > > > [ 99%] Built target pygen_gr_uhd_swig_08777 > > > [ 99%] Built target pygen_gr_video_sdl_swig_ce2c9 > > > [ 99%] Built target pygen_gr_vocoder_swig_43253 > > > [ 99%] Built target _video_sdl_swig > > > [ 99%] Built target _vocoder_swig > > > [ 99%] Built target pygen_gr_fcd_swig_c4332 > > > [ 99%] Built target _fcd_swig > > > [ 99%] Built target pygen_gr_wavelet_swig_89b19 > > > [ 99%] Built target _wavelet_swig > > > [ 99%] Built target pygen_gr_wxgui_swig_78659 > > > [100%] Built target _wxgui_swig > > > [100%] Built target pygen_gr_zeromq_swig_4d7be > > > [100%] Built target _zeromq_swig > > > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In > > function > > > ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, PyObject*, > > > PyObject*)’: > > > /home/ras/gnuradio/build/gr- > > uhd/swig/uhd_swigPYTHON_wrap.cxx:27935:15: > > > error: ‘class uhd::usrp::dboard_iface’ has no member named > ‘set_gpio_debug’ > > > (arg1)->set_gpio_debug(arg2,arg3); > > > ^ > > > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In > > function > > > ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, > PyObject*, > > > PyObject*)’: > > > /home/ras/gnuradio/build/gr- > > uhd/swig/uhd_swigPYTHON_wrap.cxx:29301:16: > > > error: ‘class uhd::usrp::dboard_iface’ has no member named > ‘set_gpio_debug’ > > > (*arg1)->set_gpio_debug(arg2,arg3); > > > ^ > > > /home/ras/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In > > function > > > ‘void init_uhd_swig()’: > > > /home/ras/gnuradio/build/gr- > > uhd/swig/uhd_swigPYTHON_wrap.cxx:49517:91: > > > error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’ > > > ant(d, "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int > > >> (uhd::usrp:: > > > ^ > > > /home/ras/gnuradio/build/gr- > > uhd/swig/uhd_swigPYTHON_wrap.cxx:49518:94: > > > error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’ > > > (d, "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int > > >> (uhd::usrp:: > > > ^ > > > /home/ras/gnuradio/build/gr- > > uhd/swig/uhd_swigPYTHON_wrap.cxx:49519:94: > > > error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’ > > > (d, "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int > > >> (uhd::usrp:: > > > ^ > > > /home/ras/gnuradio/build/gr- > > uhd/swig/uhd_swigPYTHON_wrap.cxx:49520:98: > > > error: ‘ATR_REG_FULL_DUPLEX’ is not a member of > ‘uhd::usrp::dboard_iface’ > > > "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int > > >> (uhd::usrp:: > > > ^ > > > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for target > > > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' > failed > > > make[2]: *** > > > [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] > Error > > 1 > > > CMakeFiles/Makefile2:15016: recipe for target > > > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed > > > make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2 > > > Makefile:160: recipe for target 'all' failed > > > > > > > > > > > > -- > > > > > > Ralph A. Schmid > > > Mondstr. 10 > > > 90762 Fürth > > > +49-171-3631223 > > > [email protected] > > > http://www.bclog.de/ > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Discuss-gnuradio mailing list > > > [email protected] > > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > > > > > _______________________________________________ > Discuss-gnuradio mailing list > [email protected] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list [email protected] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
