Hi all, I'm doing a simple flowgraph so i can check if i am able to get enough samples to work with gr-ieee_802.11.
It is the flowgraph i set. [image: Imágenes integradas 1] Sample rate=50MHz → Several 0s, i think, a 0 each 5 seconds. Sample rate=20MHz → a few of 0s, i think, a 0 each 30 seconds. Sample rate=10MHz → a few of 0s, i think, a 0 each 60 seconds. For 10MHz was strange the fact, that Gnuradio seems ask for 40MHz in the clock rate. [image: Imágenes integradas 2] The cpu usage was around 5%, and 60Mb-200Mb ram, the name of the process Python2. I checked the USB 3.0 speed by copying a file. The speed was around 100Mb/s I have the USRP B210 over USB 3.0. My pc is an I7 4710HQ (up to 3.5 Ghz 8 threads), 12 Gb RAM. It is supposed i can get until 62 Msamples/s, then i don't know what it is going wrong. What do you think i should set so i can get 20Mhz of sample rate without "0"s in the console? Thanks in advance. Best Regards, Cristian
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
