On 03/28/2017 01:41 PM, Jose Ruvalcaba wrote: > Hello, > > I recently tried installing gnuradio using PyBOMBS and encountered the > following error: > > /[ 88%] Building CXX object > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: > In function ‘PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, > PyObject*, PyObject*)’: > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:27229:15: > error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’ > (arg1)->set_gpio_debug(arg2,arg3); > ^ > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: > In function ‘PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*, > PyObject*, PyObject*)’: > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:28592:16: > error: ‘class uhd::usrp::dboard_iface’ has no member named ‘set_gpio_debug’ > (*arg1)->set_gpio_debug(arg2,arg3); > ^ > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: > In function ‘void init_uhd_swig()’: > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47768:91: > error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’ > ant(d, "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int >>(uhd::usrp:: > ^ > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47769:94: > error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’ > (d, "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int >>(uhd::usrp:: > ^ > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47770:94: > error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’ > (d, "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int >>(uhd::usrp:: > ^ > /home/ruvalcab/prefix/default/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:47771:98: > error: ‘ATR_REG_FULL_DUPLEX’ is not a member of ‘uhd::usrp::dboard_iface’ > "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int >>(uhd::usrp:: > ^ > gr-uhd/swig/CMakeFiles/_uhd_swig.dir/build.make:70: recipe for target > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o' failed > make[2]: *** > [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Error 1 > CMakeFiles/Makefile2:13309: recipe for target > 'gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all' failed > make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2 > Makefile:160: recipe for target 'all' failed > make: *** [all] Error 2 > PyBOMBS.Packager.source - ERROR - Build failed. See output above for > error messages. > PyBOMBS.Packager.source - ERROR - Problem occurred while building > package gnuradio: > Build failed. > > > > / > After some research I learned that it is because I installed UHD before > GNU radio using the command : /pybombs install uhd/. I have tried to > remove UHD and GNU radio by using /pybombs remove uhd/ and /pybombs > remove gnuradio/ and it seems to remove. However, when I search for UHD, > or use sudo find / -name libuhd*.so* my UBUNTU machine still shows that > have UHD installed. My question is how do I completely clean or remove > UHD so I can reinstall gnuradio? I am currently using UBUNTU 16.04 LTS. >
Try apt list --installed | grep uhd If you find anything remove it - it will most likely be libuhd-dev apt-get remove libuhd-dev -- Cinaed > Thanks, > Jose Ruvalcaba > > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
