Hi,
I get this following error while building GNU Radio 3.7.10.1. Please find the
below errors
-----
[ 86%] Built target uhd_swig_gr_uhd_swig_5e3ce
Scanning dependencies of target _uhd_swig
[ 86%] Building CXX object
gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function 'PyObject* _wrap_dboard_iface_set_gpio_debug(PyObject*, PyObject*,
PyObject*)':
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:26696:15:
error: 'class uhd::usrp::dboard_iface' has no member named 'set_gpio_debug'
(arg1)->set_gpio_debug(arg2,arg3);
^
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function 'PyObject* _wrap_dboard_iface_sptr_set_gpio_debug(PyObject*,
PyObject*, PyObject*)':
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:27979:16:
error: 'class uhd::usrp::dboard_iface' has no member named 'set_gpio_debug'
(*arg1)->set_gpio_debug(arg2,arg3);
^
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:
In function 'void init_uhd_swig()':
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:48039:91:
error: 'ATR_REG_IDLE' is not a member of 'uhd::usrp::dboard_iface'
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::ATR_REG_IDLE)));
^
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:48040:94:
error: 'ATR_REG_TX_ONLY' is not a member of 'uhd::usrp::dboard_iface'
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::ATR_REG_TX_ONLY)));
^
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:48041:94:
error: 'ATR_REG_RX_ONLY' is not a member of 'uhd::usrp::dboard_iface'
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::ATR_REG_RX_ONLY)));
^
/home/ben/workarea-gnuradio/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:48042:98:
error: 'ATR_REG_FULL_DUPLEX' is not a member of 'uhd::usrp::dboard_iface'
SWIG_Python_SetConstant(d,
"dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int
>(uhd::usrp::dboard_iface::ATR_REG_FULL_DUPLEX)));
^
make[2]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o]
Error 1
make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Error 2
make: *** [all] Error 2
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
