Hi Marcus, You were right, a thorough cleaning of everything uhd related solved the issue,
Thanks for your help ! -Yann Le Mercredi 6 Janvier 2016 13:37 CET, Marcus Müller <marcus.muel...@ettus.com> a écrit: > Hi Yann, > > this looks familiar; there was someone else with pretty exactly the same > problem, and the underlying complication was that there were two > installations of UHD header files. > Make sure only one UHD is installed, and try again. > > Best regards, > Marcus > > On 06.01.2016 12:50, Lecoq Yann wrote: > > Hello and a happy new year to all, > > > > I used to compile gnuradio and uhd from git repos on a ubuntu 14.04 > > computer and, for whatever reason, the gnuradio compilation don't work > > anymore. There must be something I modified in the config that triggered > > that, but I can't figure out what (I started wanting to to recompile in > > order to activate comedi after installing the libcomedi-dev package, but > > wether this one is installed or nt dosnt help). > > > > Typically I do a uhd cmake, make -j8, sudo make install and sudo ldconfig > > (which all look like they still work fine), and, then, a gnuradio cmake, > > make -j8, sudo make install and sudo ldconfig. Now, the gnuradio make stops > > with an error which looks related to the gr-uhd/swig component (see the > > console output at the end of this message). > > > > To be sure, I used git to compile different combination of commits for both > > uhd and gnuradio, including at least 1 uhd+gnuradio commit combination > > which I am absolutely certain works on another similar computer, but it > > didn't help. I also tried removing entirely the source code in my ~/src > > directory and restarting from scrach (after some apt-get autoremove, update > > and upgrade) with M. Leech's "build_gnuradio" script, but this failed as > > well at the same point. Note that the check of prerequisites at the > > beginning of the script doesn't report anything missing though (except a > > usual libzmq1 issue which has never been a problem) (see end of message). > > > > Any help is greatly appreciated, as I am running out of ideas to check at > > this point... > > > > Best wishes, > > > > -Yann > > > > > > > > *** CONSOLE OUTPUT NEAR GNURADIO MAKING ERROR *** > > Scanning dependencies of target _wxgui_swig > > [ 57%] Building CXX object > > gr-wxgui/swig/CMakeFiles/_wxgui_swig.dir/wxgui_swigPYTHON_wrap.cxx.o > > [ 57%] Built target pygen_gr_wavelet_swig_57e27 > > [ 57%] Building CXX object > > gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_sink_impl.cc.o > > [ 57%] Building CXX object > > gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_source_impl.cc.o > > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx: In > > function ‘void init_uhd_swig()’: > > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46579:91: > > error: ‘ATR_REG_IDLE’ is not a member of ‘uhd::usrp::dboard_iface’ > > SWIG_Python_SetConstant(d, > > "dboard_iface_ATR_REG_IDLE",SWIG_From_int(static_cast< int > > >(uhd::usrp::dboard_iface::ATR_REG_IDLE))); > > > > ^ > > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46580:94: > > error: ‘ATR_REG_TX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’ > > SWIG_Python_SetConstant(d, > > "dboard_iface_ATR_REG_TX_ONLY",SWIG_From_int(static_cast< int > > >(uhd::usrp::dboard_iface::ATR_REG_TX_ONLY))); > > > > ^ > > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46581:94: > > error: ‘ATR_REG_RX_ONLY’ is not a member of ‘uhd::usrp::dboard_iface’ > > SWIG_Python_SetConstant(d, > > "dboard_iface_ATR_REG_RX_ONLY",SWIG_From_int(static_cast< int > > >(uhd::usrp::dboard_iface::ATR_REG_RX_ONLY))); > > > > ^ > > /home/zbook_user/src/gnuradio/build/gr-uhd/swig/uhd_swigPYTHON_wrap.cxx:46582:98: > > error: ‘ATR_REG_FULL_DUPLEX’ is not a member of ‘uhd::usrp::dboard_iface’ > > SWIG_Python_SetConstant(d, > > "dboard_iface_ATR_REG_FULL_DUPLEX",SWIG_From_int(static_cast< int > > >(uhd::usrp::dboard_iface::ATR_REG_FULL_DUPLEX))); > > > > ^ > > [ 57%] Building CXX object > > gr-blocks/lib/CMakeFiles/gnuradio-blocks.dir/file_meta_sink_impl.cc.o > > make[2]: *** > > [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/uhd_swigPYTHON_wrap.cxx.o] Erreur 1 > > make[1]: *** [gr-uhd/swig/CMakeFiles/_uhd_swig.dir/all] Erreur 2 > > > > > > > > *** CONSOLE OUTPUT FOR BUILD-GNURADIO PREREQS SCRIPT > > Installing prerequisites. > > ====> THIS MAY TAKE QUITE SOME TIME <===== > > Checking for package libfontconfig1-dev > > Checking for package libxrender-dev > > Checking for package libpulse-dev > > Checking for package swig > > Checking for package g++ > > Checking for package automake > > Checking for package autoconf > > Checking for package libtool > > Checking for package python-dev > > Checking for package libfftw3-dev > > Checking for package libcppunit-dev > > Checking for package libboost-all-dev > > Checking for package libusb-dev > > Checking for package libusb-1.0-0-dev > > Checking for package fort77 > > Checking for package libsdl1.2-dev > > Checking for package python-wxgtk2.8 > > Checking for package git-core > > Checking for package libqt4-dev > > Checking for package python-numpy > > Checking for package ccache > > Checking for package python-opengl > > Checking for package libgsl0-dev > > Checking for package python-cheetah > > Checking for package python-mako > > Checking for package python-lxml > > Checking for package doxygen > > Checking for package qt4-default > > Checking for package qt4-dev-tools > > Checking for package libusb-1.0-0-dev > > Checking for package libqwt5-qt4-dev > > Checking for package libqwtplot3d-qt4-dev > > Checking for package pyqt4-dev-tools > > Checking for package python-qwt5-qt4 > > Checking for package cmake > > Checking for package git-core > > Checking for package wget > > Checking for package libxi-dev > > Checking for package python-docutils > > Checking for package gtk2-engines-pixbuf > > Checking for package r-base-dev > > Checking for package python-tk > > Checking for package liborc-0.4-0 > > Checking for package liborc-0.4-dev > > Checking for package libasound2-dev > > Checking for package python-gtk2 > > Checking for package libzmq1 > > Checking for package libzmq1-dev > > Failed to find package 'libzmq1-dev' in known package repositories > > SOME THINGS MAY NOT BUILD AS A RESULT > > Checking for package libzmq > > Checking for package libzmq-dev > > Checking for package python-requests > > Done checking packages > > Checking for library libusb ...Found library libusb > > Checking for library libboost ...Found library libboost > > Checking for library libcppunit ...Found library libcppunit > > Checking for library libfftw ...Found library libfftw > > Checking for library libgsl ...Found library libgsl > > Done > > > > > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > Discuss-gnuradio@gnu.org > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
