Dear Chris, Thank you for the help.
I tried editing the makefile in "pybombs/src/gqrx" and then I run "sudo ./pybombs install gqrx" again. However the installation still failed with the error message below. And if I run "sudo find / -name libuhd.so\*" /usr/lib/x86_64-linux-gnu/libuhd.so.003.007 /usr/lib/x86_64-linux-gnu/libuhd.so.003 /usr/local/lib/libuhd.so /usr/local/lib/libuhd.so.003.010 /usr/local/lib/libuhd.so.003 /home/carl/pybombs/src/uhd/host/build/lib/libuhd.so /home/carl/pybombs/src/uhd/host/build/lib/libuhd.so.003.010 /home/carl/pybombs/src/uhd/host/build/lib/libuhd.so.003 Thanks again for taking your time! Best Carl Installing from source: gqrx Building: (100%) [==========================================================] Build failed. Re-trying with reduced makewidth and higher verbosity. g++ -m64 -Wl,-O1 -o gqrx main.o mainwindow.o receiver.o remote_control.o remote_control_settings.o cafsk12.o costabf.o agc_impl.o correct_iq_cc.o lpf.o decoder_impl.o parser_impl.o resampler_xx.o rx_agc_xx.o rx_demod_am.o rx_demod_fm.o rx_fft.o rx_filter.o rx_meter.o rx_noise_blanker_cc.o rx_rds.o sniffer_f.o stereo_demod.o udp_sink_f.o afsk1200win.o agc_options.o audio_options.o bookmarks.o bookmarkstablemodel.o bookmarkstaglist.o demod_options.o dockaudio.o dockbookmarks.o dockinputctl.o dockrds.o dockrxopt.o dockfft.o freqctrl.o ioconfig.o iq_tool.o meter.o nb_options.o plotter.o qtcolorpicker.o nbrx.o receiver_base.o wfmrx.o pa_device_list.o pa_sink.o pa_source.o moc_mainwindow.o moc_remote_control.o moc_remote_control_settings.o moc_cafsk12.o moc_afsk1200win.o moc_agc_options.o moc_audio_options.o moc_bookmarks.o moc_bookmarkstablemodel.o moc_bookmarkstaglist.o moc_demod_options.o moc_dockaudio.o moc_dockbookmarks.o moc_dockfft.o moc_dockinputctl.o moc_dockrds.o moc_dockrxopt.o moc_freqctrl.o moc_ioconfig.o moc_iq_tool.o moc_meter.o moc_nb_options.o moc_plotter.o moc_qtcolorpicker.o qrc_icons.o qrc_textfiles.o -L/usr/lib/x86_64-linux-gnu -lboost_system -lboost_program_options -lrt -lpulse-simple -lpulse -L/usr/local/lib -lgnuradio-analog -lvolk -lgnuradio-digital -lgnuradio-filter -lgnuradio-fft -luhd -lgnuradio-osmosdr -lgnuradio-blocks -lgnuradio-runtime -lgnuradio-pmt -lQtGui -lQtNetwork -lQtCore -lpthread /usr/lib/x86_64-linux-gnu/libgnuradio-osmosdr.so: undefined reference to `uhd::device::find(uhd::device_addr_t const&)' collect2: error: ld returned 1 exit status make: *** [gqrx] Error 1 Build failed. See output above for error messages. On 16 September 2015 at 21:46, Chris Kuethe <chris.kue...@gmail.com> wrote: > Your problem is "/usr/lib/x86_64-linux-gnu/libgnuradio-osmosdr.so: > undefined reference to `uhd::device::find(uhd::device_addr_t const&)'" > > The linker can't find UHD. I see no "-luhd" in your linker flags, so > the error makes sense... I wonder why the configuration process didn't > find UHD, though. Does it exist on your system? Try "find / -name > libuhd.so\*" > > A quick fix is to edit gqrx's generated makefile and add -luhd before > -lgnuradio-osmosdr > > On Wed, Sep 16, 2015 at 7:31 AM, Carl Olsson <carlolsson...@gmail.com> > wrote: > > Dear all, > > > > I have gnuradio installed on my 14.04 system using PyBOMBS. > > Now I would like to try out gqrx but I get the error message pasted > below. > > > > I have found many other with this problem on the Internet and they solve > it > > by removing -mt from the gqrx.lwr file. > > However, in my gqrx.lwr file the -mt is already removed. Anyone know what > > the problem might be? > > > > Best Regards > > Carl > > > > The Error Message: > > > > Checking connectivity... done. > > > > # you probably don't need BOOST_SUFFIX=-mt > > qmake BOOST_SUFFIX= > > > > Configuring: (100%) > > [==========================================================] > > Building: (100%) > > [==========================================================] > > Build failed. Re-trying with reduced makewidth and higher verbosity. > > g++ -m64 -Wl,-O1 -o gqrx main.o mainwindow.o receiver.o remote_control.o > > remote_control_settings.o cafsk12.o costabf.o agc_impl.o correct_iq_cc.o > > lpf.o decoder_impl.o parser_impl.o resampler_xx.o rx_agc_xx.o > rx_demod_am.o > > rx_demod_fm.o rx_fft.o rx_filter.o rx_meter.o rx_noise_blanker_cc.o > rx_rds.o > > sniffer_f.o stereo_demod.o udp_sink_f.o afsk1200win.o agc_options.o > > audio_options.o bookmarks.o bookmarkstablemodel.o bookmarkstaglist.o > > demod_options.o dockaudio.o dockbookmarks.o dockinputctl.o dockrds.o > > dockrxopt.o dockfft.o freqctrl.o ioconfig.o iq_tool.o meter.o > nb_options.o > > plotter.o qtcolorpicker.o nbrx.o receiver_base.o wfmrx.o pa_device_list.o > > pa_sink.o pa_source.o moc_mainwindow.o moc_remote_control.o > > moc_remote_control_settings.o moc_cafsk12.o moc_afsk1200win.o > > moc_agc_options.o moc_audio_options.o moc_bookmarks.o > > moc_bookmarkstablemodel.o moc_bookmarkstaglist.o moc_demod_options.o > > moc_dockaudio.o moc_dockbookmarks.o moc_dockfft.o moc_dockinputctl.o > > moc_dockrds.o moc_dockrxopt.o moc_freqctrl.o moc_ioconfig.o moc_iq_tool.o > > moc_meter.o moc_nb_options.o moc_plotter.o moc_qtcolorpicker.o > qrc_icons.o > > qrc_textfiles.o -L/usr/lib/x86_64-linux-gnu -lboost_system > > -lboost_program_options -lrt -lpulse-simple -lpulse -L/usr/local/lib > > -lgnuradio-analog -lvolk -lgnuradio-digital -lgnuradio-filter > -lgnuradio-fft > > -lgnuradio-osmosdr -lgnuradio-blocks -lgnuradio-runtime -lgnuradio-pmt > > -lQtGui -lQtNetwork -lQtCore -lpthread > > /usr/lib/x86_64-linux-gnu/libgnuradio-osmosdr.so: undefined reference to > > `uhd::device::find(uhd::device_addr_t const&)' > > collect2: error: ld returned 1 exit status > > make: *** [gqrx] Error 1 > > Build failed. See output above for error messages. > > > > > > _______________________________________________ > > Discuss-gnuradio mailing list > > Discuss-gnuradio@gnu.org > > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > > > > > -- > GDB has a 'break' feature; why doesn't it have 'fix' too? >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
