My GNU Radio version is 3.7.6.1 and my system runs Ubuntu release 14.04.2 LTS.
I chekced the file you asked me for and the line in question is: "ENABLE_GR_WXGUI_cached:INTERNAL=OFF", so just as it was guessed it is disabled. But how can I enable it? Thank you again, Nikos ________________________________ From: discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org [discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org] on behalf of Marcus Müller [marcus.muel...@ettus.com] Sent: Sunday, March 15, 2015 1:46 PM To: discuss-gnuradio@gnu.org Subject: Re: [Discuss-gnuradio] Majority of WX GUI Widgets missing from Companion Ah, ok; my mistake; the "--enabled-components" option was just added recently; getting your GNU Radio version would be nice, nevertheless, so could you run "gnuradio-config-info -v" ? The CMakeOutput.log contained less info than I hoped; you should have a look into /home/nikos/gnuradio/build/CMakeCache.txt. That will contain the information about installed libraries and available GNU Radio components. The line you're looking for starts with ENABLE_GR_WXGUI. I think the easiest way to go from here is to cd into /home/nikos/gnuradio/build. You will see CMake go through all the GNU Radio in-tree modules, and test for the dependencies of each of them. Look for the paragraph related to the gr-wxgui component. Most probably, it will tell you what is missing. Can you also share your Linux distro and version with us (as per /etc/issue)? The point is that as far as I can guess, build-gnuradio wasn't able to automatically install all necessary libraries. For most systems, it can, but some are just unknown to it or have seen modifications, so that auto-installation is bound to fail. Greetings, Marcus On 03/14/2015 09:34 PM, NIKOS BIZANIS wrote: "gnuradio-config-info -v --enabled-components" results in an unrecognized option error for --enabled-components. I have attached the log you asked me for. Thank you, Nikos ________________________________ From: discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org<mailto:discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org> [discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org<mailto:discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org>] on behalf of Marcus Müller [marcus.muel...@ettus.com<mailto:marcus.muel...@ettus.com>] Sent: Saturday, March 14, 2015 9:01 PM To: discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org> Subject: Re: [Discuss-gnuradio] Majority of WX GUI Widgets missing from Companion Do you have the diagnostics I asked you for? Most probably, the log file that was generated during your GNU Radio compilation contains more information; it's called CMakeOutput.log and should be in <downloadfolder>/gnuradio/build/CMakeFiles/ Also, the output of "gnuradio-config-info -v --enabled-components" would be i Greetings, Marcus On 03/14/2015 08:38 PM, NIKOS BIZANIS wrote: Hi eveyone again, as an update to the issue I was facing, I re-built GNU Radio, just as Marcus suggested, but I still can't see the WX GUI Widgets in the Companion. I can see the gr-wxgui folder in my gnuradio tree, but apparantly it is still not built along with the rest of the project, and I don't know what to do to make it work. Thank you all, Nikos ________________________________ From: discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org<mailto:discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org> [discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org<mailto:discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org>] on behalf of NIKOS BIZANIS [n.biza...@student.tudelft.nl<mailto:n.biza...@student.tudelft.nl>] Sent: Saturday, March 14, 2015 3:40 PM To: discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org> Subject: Re: [Discuss-gnuradio] Majority of WX GUI Widgets missing from Companion ________________________________ Hi Marcus, it's probably remains from an older installation attempt I had made (using Pybombs), which failed. After that I used that script and it worked like a charm. So if I would just do a "./build-gnuradio" from my installation directory in order to build again, it would probably work, right? Thanks for your help, Nikos From: discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org<mailto:discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org> [discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org<mailto:discuss-gnuradio-bounces+n.bizanis=student.tudelft...@gnu.org>] on behalf of Marcus Müller [marcus.muel...@ettus.com<mailto:marcus.muel...@ettus.com>] Sent: Saturday, March 14, 2015 2:45 PM To: discuss-gnuradio@gnu.org<mailto:discuss-gnuradio@gnu.org> Subject: Re: [Discuss-gnuradio] Majority of WX GUI Widgets missing from Companion Hi Nikos I downloaded and built GNU Radio from sbrac.org ah, ok, I presume that means you used Marcus Leech's build-gnuradio script. The only problem is that when I am searching for any WX GUI Widgets, I can only see WX GUI Static Text, WX GUI Time Panel and WX DOA Compass. As you've already found out, this probably means that some dependencies were missing. In fact, of the three you list, only the static text widget is part of GNU Radio itself, so what you're seeing is possibly remains of an older installation. Are you sure you don't have any gnuradio package from your linux distribution installed? Based on a previous discussion on that mailing list I also installed WXPython (2.8) but the problem remains. Did you re-build GNU Radio after that? Otherwise, the GUI blocks could not have been built, and installed. Most probably, the log file that was generated during your GNU Radio compilation contains more information; it's called CMakeOutput.log and should be in <downloadfolder>/gnuradio/build/CMakeFiles/ Also, the output of "gnuradio-config-info -v --enabled-components" would be interesting. Greetings, Marcus On 03/14/2015 02:03 PM, NIKOS BIZANIS wrote: Hi everyone, I downloaded and built GNU Radio from sbrac.org, and it operates normally. The only problem is that when I am searching for any WX GUI Widgets, I can only see WX GUI Static Text, WX GUI Time Panel and WX DOA Compass. Based on a previous discussion on that mailing list I also installed WXPython (2.8) but the problem remains. Any ideas? Thank you, Nikos _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org<mailto:Discuss-gnuradio@gnu.org> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org<mailto:Discuss-gnuradio@gnu.org> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org<mailto:Discuss-gnuradio@gnu.org> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
