Dose any one know what is the problem with this device.Hardware NI USRP 2940R = x310OS Ubuntu 14.04LTSConnection SFP0
what are these warnings X300 unknown product code in EEPROM: 2104 RX dboard ID: Unknown (0xffff) ./usrp_burn_mb_eeprom --read-all linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.002-80-ge28d7844 Creating USRP device from address: UHD Warning: X300 unknown product code in EEPROM: 2104 UHD Warning: X300 unknown product code in EEPROM: 2104-- X300 initialization sequence...-- Determining maximum frame size... 1472 bytes.-- Setup basic communication...-- Loading values from EEPROM... UHD Warning: X300 unknown product code in EEPROM: 2104-- Setup RF frontend clocking...-- Radio 1x clock:200-- Initialize Radio control...-- Performing register loopback test... pass UHD Warning: Unknown transceiver board ID combination. Is your daughter-board mounted properly? RX dboard ID: Unknown (0xffff) TX dboard ID: WBX v4 (0x0062)-- Performing register loopback test... pass UHD Warning: Unknown transceiver board ID combination. Is your daughter-board mounted properly? RX dboard ID: Unknown (0xffff) TX dboard ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f)-- Initializing clock and time using internal sources... done Fetching current settings from EEPROM... EEPROM ["revision"] is "52" EEPROM ["product"] is "2104" EEPROM ["mac-addr0"] is "00:80:2f:0a:f5:0c" EEPROM ["mac-addr1"] is "10:80:2f:0a:f5:0d" EEPROM ["gateway"] is "192.168.10.1" EEPROM ["ip-addr0"] is "192.168.10.2" EEPROM ["subnet0"] is "255.255.255.0" EEPROM ["ip-addr1"] is "192.168.20.2" EEPROM ["subnet1"] is "255.255.255.0" EEPROM ["ip-addr2"] is "192.168.30.2" EEPROM ["subnet2"] is "255.255.255.0" EEPROM ["ip-addr3"] is "192.168.40.2" EEPROM ["subnet3"] is "255.255.255.0" EEPROM ["serial"] is "F54E25" EEPROM ["name"] is "" Warm RegardsJunaid
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
