i have NI USRP 2940R i.e x310 connected to machine running Ubuntu 14.04 via SFP
port 0.What are these warning about
x300 is not defined
also the tuned frequency is 000000MHz instead of have having a set target
frequency.
usrp_x3xx_fpga_burner --addr=192.168.10.2 --fpga-path
/home/XXXXXX/Downloads/uhd-images_003.008.001-release/share/uhd/images/usrp_x310_fpga_HGS.bit
Attempting to find device...UHD Warning: X300 unknown product code in
EEPROM: 2104
UHD Warning: X300 unknown product code in EEPROM: 2104found!Successfully
burned FPGA image!
UHD Warning: Tune Request: 802.500000 MHz The requested RX frequency is
outside of the system range, and has been clipped: Target Frequency:
802.500000 MHz Clipped Target Frequency: 0.000000 MHz Successfully
tuned to 0.000000 MHz
linux; GNU C++ version 4.8.2; Boost_105400; UHD_003.008.002-83-g09c9c6bb
UHD Warning: X300 unknown product code in EEPROM: 2104
UHD Warning: X300 unknown product code in EEPROM: 2104-- X300 initialization
sequence...-- Determining maximum frame size... 1472 bytes.-- Setup basic
communication...-- Loading values from EEPROM...
UHD Warning: X300 unknown product code in EEPROM: 2104-- Setup RF frontend
clocking...-- Radio 1x clock:200-- Initialize Radio control...-- Performing
register loopback test... pass
UHD Warning: Unknown transceiver board ID combination. Is your
daughter-board mounted properly? RX dboard ID: Unknown (0xffff) TX dboard
ID: WBX v4 (0x0062)-- Performing register loopback test... pass
UHD Warning: Unknown transceiver board ID combination. Is your
daughter-board mounted properly? RX dboard ID: Unknown (0xffff) TX dboard
ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple GDB, WBX-120 +
Simple GDB (0x004f)-- Initializing clock and time using internal sources...
done _____________________________________________________ /| Device:
X-Series Device| _____________________________________________________|
/| | Mboard: X300?| | revision: 255| | product: 2104| |
mac-addr0: 00:80:2f:0a:f5:0c| | mac-addr1: 10:80:2f:0a:f5:0d| |
gateway: 192.168.10.1| | ip-addr0: 192.168.10.2| | subnet0:
255.255.255.0| | ip-addr1: 192.168.20.2| | subnet1: 255.255.255.0| |
ip-addr2: 192.168.30.2| | subnet2: 255.255.255.0| | ip-addr3:
192.168.40.2| | subnet3: 255.255.255.0| | serial: F54E25| | FW
Version: 3.0| | FPGA Version: 9.0| | | | Time sources: internal,
external, gpsdo| | Clock sources: internal, external, gpsdo| | Sensors:
ref_locked| | _____________________________________________________| |
/| | | RX DSP: 0| | | Freq range: -100.000 to 100.000 MHz|
| _____________________________________________________| | /| | |
RX DSP: 1| | | Freq range: -100.000 to 100.000 MHz| |
_____________________________________________________| | /| | |
RX Dboard: A| | |
_____________________________________________________| | | /| | |
| RX Frontend: 0| | | | Name: Unknown (0xffff) - 0| | | |
Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000
MHz| | | | Gain Elements: None| | | | Connection Type: IQ| |
| | Uses LO offset: No| | |
_____________________________________________________| | | /| | |
| RX Codec: A| | | | Name: ads62p48| | | | Gain range
digital: 0.0 to 6.0 step 0.5 dB| |
_____________________________________________________| | /| | |
RX Dboard: B| | |
_____________________________________________________| | | /| | |
| RX Frontend: 0| | | | Name: Unknown (0xffff) - 0| | | |
Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000
MHz| | | | Gain Elements: None| | | | Connection Type: IQ| |
| | Uses LO offset: No| | |
_____________________________________________________| | | /| | |
| RX Codec: B| | | | Name: ads62p48| | | | Gain range
digital: 0.0 to 6.0 step 0.5 dB| |
_____________________________________________________| | /| | |
TX DSP: 0| | | Freq range: -100.000 to 100.000 MHz| |
_____________________________________________________| | /| | |
TX DSP: 1| | | Freq range: -100.000 to 100.000 MHz| |
_____________________________________________________| | /| | |
TX Dboard: A| | | ID: WBX v4 (0x0062)| | | Serial: F52CA2| | |
_____________________________________________________| | | /| | |
| TX Frontend: 0| | | | Name: WBX v4 (0x0062) - 0| | | |
Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000
MHz| | | | Gain Elements: None| | | | Connection Type: IQ| |
| | Uses LO offset: No| | |
_____________________________________________________| | | /| | |
| TX Codec: A| | | | Name: ad9146| | | | Gain Elements:
None| | _____________________________________________________| | /|
| | TX Dboard: B| | | ID: WBX v4 (0x0062)| | | Serial:
F52C70| | | ID: WBX + Simple GDB, WBX v3 + Simple GDB, WBX v4 + Simple
GDB, WBX-120 + Simple GDB (0x004f)| | | Serial: F50B5E| | |
_____________________________________________________| | | /| | |
| TX Frontend: 0| | | | Name: WBX + Simple GDB, WBX v3 + Simple
GDB, WBX v4 + Simple GDB, WBX-120 + Simple GDB (0x004f) - 0| | | |
Antennas: | | | | Sensors: | | | | Freq range: 0.000 to 0.000
MHz| | | | Gain Elements: None| | | | Connection Type: IQ| |
| | Uses LO offset: No| | |
_____________________________________________________| | | /| | |
| TX Codec: B| | | | Name: ad9146| | | | Gain Elements:
None
Regards Muhammad JunaidR&D DepartmentNRTC Haripur
KPK+92-995666617+92-3335975856www.http://junaidmuhammad.webs.com/
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
