Hi Marcus,

I use bladeRF hardware, not USRP. So I have "osmocom" sink and source
blocks in my flow graph. Do you have any idea about this.
Thank you very much,

Best Regards,
Van-Ly



Van-Ly Nguyen,
Research Assistant,
Signals and Systems Laboratory - SSL
Faculty of Electronics and Telecommunications - FET
University of Engineering and Technology - UET
Vietnam National University, Hanoi - VNU

Tel: (+84) 97 881 9406


On Wed, Dec 3, 2014 at 10:28 PM, Marcus Müller <marcus.muel...@ettus.com>
wrote:

>  Hello Van-Ly,
>
> what hardware are you using?
> If you're using any USRP, then the gr-uhd [1] blocks [2] will allow you to
> tune using stream tags, asynchronous messages and method calls.
> From your problem description, it sounds like using stream tags is your
> best choice. If you want to know more about how to use these, I recommend
> going through the new guided tutorials [3], especially part 5 (which kind
> of relies on you having read the first four parts, but since I think you're
> already somewhat friends with GNU Radio, this might not be too much work).
>
> Greetings,
> Marcus
>
>
> [1] http://gnuradio.org/doc/doxygen/page_uhd.html
> [2] sink:
> http://gnuradio.org/doc/doxygen/classgr_1_1uhd_1_1usrp__sink.html
> [3] http://gnuradio.org/redmine/projects/gnuradio/wiki/Guided_Tutorials
>
> On 12/03/2014 04:21 PM, Nguyễn Văn Lý wrote:
>
> Hello everyone,
>
> Does anyone know how to change Tx frequency during transmission. I mean the
> transmitter operates at f0 GHz in some interval of time and then change to
> operate at f1 GHz.
>
> Sincerely,
> Van-Ly
>
> Van-Ly Nguyen,
> Research Assistant,
> Signals and Systems Laboratory - SSL
> Faculty of Electronics and Telecommunications - FET
> University of Engineering and Technology - UET
> Vietnam National University, Hanoi - VNU
>
> Tel: (+84) 97 881 9406
>
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing 
> listDiscuss-gnuradio@gnu.orghttps://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
>
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio

Reply via email to