> When u say complex samples, i thought it should in time domain, yes, these are time domain samples.
> I just want use USRP to > collect the a wide band signal around and save the data to the txt file, Usually, there's no good reason to save millions of samples in text format -- it's not really useful, just big. If you, for some reason, need that, you can either write your own sink that does that, or use python, octave, matlab, C, C++, or whatever you like to load the binaries and print out strings representing complex numbers textually. > so i use the usr_spectrum_sense. usrp_spectrum_sense is really a visualization demo. If you just want to save the signal from a USRP to a file, that's a two block flow graph in the GNU Radio companion: Just connect the USRP Source to a File Sink, parameterize both to your likings, and you're done. If that sounds strange to you, I can really recommend going through the guided tutorials 1, 2 and 3, and most of your questions will be answered :) http://gnuradio.org/redmine/projects/gnuradio/wiki/Guided_Tutorials Greetings, Marcus On 12/01/2014 05:14 PM, Leo Yang wrote: > When u say complex samples, i thought it should in time domain, and after the > the fft block, it transfer to frequency domain. I just want use USRP to > collect the a wide band signal around and save the data to the txt file, so > i use the usr_spectrum_sense. > > and how to make the binary samples visualized and could be processed? > or the s2v is the thing I may consider? > > > > -- > View this message in context: > http://gnuradio.4.n7.nabble.com/Log-raw-data-from-the-usrp-spectrum-sense-py-tp51503p51506.html > Sent from the GnuRadio mailing list archive at Nabble.com. > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
