Hi, just to register the cause of the error, if can be helpful for others
in the future!
The problem was that the module user_peripheral was missing. Apparently
when you configure the it and when you get the oe manifest with the daisy
branch it does not come by default. The ideal is to use the stable branch.
> git clone git://github.com/balister/oe-gnuradio-manifest.git -b stable
moreover, after,you manage to have a bootable card, before trying the
example you need to insert the module. For me:
> insmod /lib/modules/3.8.11-xilinx/extra/user_peripheral.ko
Otherwise you will get an null pointer exception when it tries to get the
attributes of the device on the line:
*buffer_length = atol(udev_device_get_sysattr_value(dev, "xx_buf_len"));
Best regards...
Daniel
On Tue, Oct 28, 2014 at 8:58 AM, Daniel Camara <danielcam...@gmail.com>
wrote:
>
> Hi,
>
> I would like to run the example from the GNURadio adaptation for Zynq (
> http://gnuradio.org/redmine/projects/gnuradio/wiki/Zynq), but I am not
> able to run it, it gives me a coredump.
>
> I managed to create the bootable card, at least I think so as the example
> does not work.
>
> What I did:
>
> zedboard> cat zedboard.bin > /dev/xdevcfg
> zedboard> cat /sys/devices/amba.0/f8007000.ps7-dev-cfg/prog_done
> 1
>
> zedboard> ./zynq_fir_filter_example
> Read the FPGA status...
> /sys/devices/amba.0/f8007000.ps7-dev-cfg/prog_done = 1
> Setup the driver...
> Segmentation fault (core dumped)
>
> zedboard> file zynq_fir_filter_example
> zynq_fir_filter_example: ELF 32-bit LSB executable, ARM, EABI5 version 1
> (SYSV), dynamically linked (uses shared libs), for GNU/Linux 2.6.16,
> BuildID[sha1]=b241efee0c9289c30bd2c24975a628f74c270b4d, not stripped
>
> zedboard> uname -a
> Linux zedboard-zynq7 3.14.2-xilinx #1 SMP PREEMPT Fri Oct 24 09:13:25 CEST
> 2014 armv7l GNU/Linux
>
> zedboard> # gdb
> GNU gdb (GDB) 7.6.2
> Copyright (C) 2013 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later <
> http://gnu.org/licenses/gpl.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law. Type "show copying"
> and "show warranty" for details.
> This GDB was configured as "arm-oe-linux-gnueabi".
> For bug reporting instructions, please see:
> <http://www.gnu.org/software/gdb/bugs/>.
> (gdb) core core
> [New LWP 882]
> Core was generated by `./zynq_fir_filter_example'.
> Program terminated with signal 11, Segmentation fault.
> #0 0xb6eade80 in ?? ()
> (gdb) bt
> #0 0xb6eade80 in ?? ()
> #1 0x0000966c in ?? ()
> #2 0x0000966c in ?? ()
> Backtrace stopped: previous frame identical to this frame (corrupt stack?)
>
> ----
> The compilation of the example was OK, no error, the compilation and
> installation of gr-zynq module, the same.
>
> Have some one else tried this zynq implementation recently?
>
> --
> Best regards...
>
> Daniel
>
--
Best regards...
Daniel
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
