Hey Andrew,
First, that subdev seems off -- I'd assume it's something like "A:0
B:0"? Next, I'm not even sure what you mean you set the channels to
"0,1" on both devices. You should have 1 streamer, with a channel
setting of "0,1,2,3". The 'args' string seems correct.
Does this help?
M
On 30.09.2014 13:01, Daigle, Andrew - 1008 - MITLL wrote:
Hello!
I am having trouble trying to create a continuous stream of complex
shorts from multiple (2) X310 USRPs (each running 2 channels) over a
single 1gigE switch (at a very low sampling rate); currently it appears
as though I can only stream from one USRP at a time and I can't seem to
figure out why. I should note I don't have this problem running each
USRP on its own dedicated network (but unfortunately that won't be
possible moving forward).
To date, I have been using the rx_multi_samples example provided with
UHD (source 003.007.002). I don’t seem to have any issue connecting to
both USRPs and setting the parameters via the args=”addr0=192.168.10.2,
addr1=192.168.10.3” command. It is just that when I call rx_stream->recv
only the lights on the USRP which was listed first in args turn on. The
subdev spec and channel selection for each USRP is set to "A:A B:A" and
"0,1" and the incoming data from rx_stream is two channels of complex
shorts (not 4 like I would expect from 2 USRPs).
Do I have to initiate the streams differently or am I missing something?
Thanks!
-Andrew
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
