Good afternoon,
Disclaimer: New to everything related to GnuRadio.
Summary:
Receiving the following error: "fusb::_submit_urb: Cannot allocate memory"
Using GnuRadio with gnss-sdr source block and a WX GUI FFT Sink block (just
as a test to try to get hardware working). This is my first GnuRadio
execution.
What does this error mean exactly, and how should I approach solving it?
Expansion:
OS: Ubuntu 14.04 LTS. I am using the SiGe GN3S Sampler v2 USB front-end with
a Garmin GA 27C antenna to gather raw GPS data for post-processing. When
executing the Gnu-Radio Companion:
<<< Welcome to GNU Radio Companion 3.7.5git-112-gdb2c447c >>>
Preferences file: /home/dsradin/.grc
Block paths:
/usr/local/share/gnuradio/grc/blocks
/home/dsradin/.grc_gnuradio
Loading: "/home/dsradin/test.grc"
>>> Done
Showing: "/home/dsradin/test.grc"
Generating: "/home/dsradin/top_block.py"
>>> Warning: This flow graph may not have flow control: no audio or usrp
>>> blocks found. Add a Misc->Throttle block to your flow graph to avoid CPU
>>> congestion.
Executing: "/home/dsradin/top_block.py"
(python2:17641): IBUS-WARNING **: The owner of
/home/dsradin/.config/ibus/bus is not root!
GN3S Device Found... awaiting firmware flash
Using device vendor id 0x1781 product id 0x0b39
GN3S flashing ...
GN3S firmware file found!
End of file
GN3S flash complete!
Received handle for GNSS Front-End device
fusb::_submit_urb: Cannot allocate memory
_submit_urb failed
.
.
.
fusb::_submit_urb: Cannot allocate memory
_submit_urb failed
Creating GPS Source
GN3S Start
started TX
GN3S overflow at time Tue Jul 29 14:03:29 2014
GN3S overflow at time Tue Jul 29 14:03:29 2014
GN3S overflow at time Tue Jul 29 14:03:29 2014
GN3S overflow at time Tue Jul 29 14:03:29 2014
GN3S overflow at time Tue Jul 29 14:03:29 2014
>>> Done
I have installed all components (that I'm aware of) of GnuRadio, gnss-sdr,
all their dependencies, and configured the drivers for the specific
front-end.
Any advice or assistance is appreciated! Much thanks!
--
View this message in context:
http://gnuradio.4.n7.nabble.com/fusb-submit-urb-Cannot-allocate-memory-Hardware-integration-tp49668.html
Sent from the GnuRadio mailing list archive at Nabble.com.
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
