Dear all,
*I am new to gnuradio. I am trying to run an experiment, but I got an error
as follows:*
UHD Error:
USB open failed: insufficient permissions.
See the application notes for your device.
Traceback (most recent call last):
File "/home/van-ly/GNU_Radio/SDR Implementation of OFDM-based Network
Coding_Project Codes and Files/ofdm_transmitter.py", line 198, in <module>
tb = ofdm_transmitter()
File "/home/van-ly/GNU_Radio/SDR Implementation of OFDM-based Network
Coding_Project Codes and Files/ofdm_transmitter.py", line 67, in __init__
channels=range(1),
File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/__init__.py",
line 121, in constructor_interceptor
return old_constructor(*args)
File "/usr/local/lib/python2.7/dist-packages/gnuradio/uhd/uhd_swig.py",
line 2208, in make
return _uhd_swig.usrp_sink_make(*args)
RuntimeError: LookupError: KeyError: No devices found for ----->
Empty Device Address
*Then I tried a command (sudo uhd_usrp_probe) to test the UHD installation
and I got *
linux; GNU C++ version 4.8.1; Boost_104800; UHD_003.005.004-0-unknown
-- Loading firmware image: /usr/local/share/uhd/images/usrp1_fw.ihx... done
-- Opening a USRP1 device...
-- Loading FPGA image: /usr/local/share/uhd/images/usrp1_fpga.rbf... done
-- Using FPGA clock rate of 64.000000MHz...
_____________________________________________________
/
| Device: USRP1 Device
| _____________________________________________________
| /
| | Mboard: USRP1
| | serial: 6R2706U1
| |
| | Time sources: none
| | Clock sources: internal
| | Sensors:
| | _____________________________________________________
| | /
| | | RX DSP: 0
| | | Freq range: -32.000 to 32.000 Mhz
| | _____________________________________________________
| | /
| | | RX DSP: 1
| | | Freq range: -32.000 to 32.000 Mhz
| | _____________________________________________________
| | /
| | | RX Dboard: A
| | | _____________________________________________________
| | | /
| | | | RX Frontend: 0
| | | | Name: Unknown (0xffff) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 Mhz
| | | | Gain Elements: None
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: A
| | | | Name: ad9522
| | | | Gain range pga: 0.0 to 20.0 step 1.0 dB
| | _____________________________________________________
| | /
| | | RX Dboard: B
| | | ID: RFX2400 (0x0027)
| | | Serial: E5R12YBR2
| | | _____________________________________________________
| | | /
| | | | RX Frontend: 0
| | | | Name: RFX2400 RX
| | | | Antennas: TX/RX, RX2, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 2300.000 to 2900.000 Mhz
| | | | Gain range PGA0: 0.0 to 70.0 step 0.0 dB
| | | | Connection Type: QI
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | RX Codec: B
| | | | Name: ad9522
| | | | Gain range pga: 0.0 to 20.0 step 1.0 dB
| | _____________________________________________________
| | /
| | | TX DSP: 0
| | | Freq range: -44.000 to 44.000 Mhz
| | _____________________________________________________
| | /
| | | TX DSP: 1
| | | Freq range: -44.000 to 44.000 Mhz
| | _____________________________________________________
| | /
| | | TX Dboard: A
| | | _____________________________________________________
| | | /
| | | | TX Frontend: 0
| | | | Name: Unknown (0xffff) - 0
| | | | Antennas:
| | | | Sensors:
| | | | Freq range: 0.000 to 0.000 Mhz
| | | | Gain Elements: None
| | | | Connection Type: IQ
| | | | Uses LO offset: No
| | | _____________________________________________________
| | | /
| | | | TX Codec: A
| | | | Name: ad9522
| | | | Gain range pga: -20.0 to 0.0 step 0.1 dB
| | _____________________________________________________
| | /
| | | TX Dboard: B
| | | ID: RFX2400 (0x002b)
| | | Serial: E5R12YBR2
| | | _____________________________________________________
| | | /
| | | | TX Frontend: 0
| | | | Name: RFX2400 TX
| | | | Antennas: TX/RX, CAL
| | | | Sensors: lo_locked
| | | | Freq range: 2300.000 to 2900.000 Mhz
| | | | Gain Elements: None
| | | | Connection Type: IQ
| | | | Uses LO offset: Yes
| | | _____________________________________________________
| | | /
| | | | TX Codec: B
| | | | Name: ad9522
| | | | Gain range pga: -20.0 to 0.0 step 0.1 dB
Can anyone tell me why so? and help me how to fix this error.
Thanks in advance
Van-Ly
Nguyen Van-Ly,
Vietnam National University, Hanoi - VNU
University of Engineering and Technology - UET
Faculty of Electronics and Telecommunications - FET
Tel: +84 978 819 406
Standing on my own two feet !!!
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
