Hello, i'm new in gnuradio and i want to update all needed to program this device the e110.
how it says in: http://code.ettus.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-do-I-install-GNU-Radio-from-source i have downloaded the latest image e1xx-003 and store to sd with the MakeEttusSDCard.legacy.sh.(the MakeEttusSDCard.sh didn´t work for me). i updated the uhd and then the FPGA firmaware following all instructions and everything OK. but the problem is when i want to update the gnuradio,if i run: opkg remove --force-depends gnuradio gnuradio-dev gnuradio-examples task-gnuradio git clone http://gnuradio.org/git/gnuradio.git gnuradio.git # cd gnuradio.git # mkdir build # cd build # cmake -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_TOOLCHAIN_FILE=../cmake/Toolchains........ # make i have this error: [ 13%] Built target pygen_gnuradio_runtime_python_gnuradio_gru_21325 [ 13%] Generating __init__.pyc, pmt_to_python.pyc Traceback (most recent call last): File "/home/root/gnuradio.git/build/python_compile_helper.py", line 6, in <mod ule> py_compile.compile(file=src, cfile=gen, doraise=True) File "/usr/lib/python2.6/py_compile.py", line 129, in compile raise py_exc py_compile.PyCompileError: SyntaxError: ('invalid syntax', ('/home/root/gnuradio .git/gnuradio-runtime/python/pmt/pmt_to_python.py', 67, 88, ' (numpy.float32, pmt.init_f32vector, float, pmt.f32vector_elements, pmt.is_f32vector),\n')) make[2]: *** [gnuradio-runtime/python/pmt/__init__.pyc] Error 1 make[1]: *** [gnuradio-runtime/python/pmt/CMakeFiles/pygen_gnuradio_runtime_pyth on_pmt_a42cc.dir/all] Error 2 make: *** [all] Error 2 some idea?. looks like there is some syntax error in the code downloaded but is not possible. thanks. best regards, Julian. -- View this message in context: http://gnuradio.4.n7.nabble.com/installing-gnuradio-e110-tp47730.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio