Hello, I use an external rubidium reference clock with my N210, everything works fine with some patchs (python & c++ libs), but I failed with the conventional way.
I found useful information on this page : http://files.ettus.com/uhd_docs/manual/html/gpsdo.html But this command below change nothing :/ sudo ./usrp_burn_mb_eeprom --args addr=192... --key=gpsdo --val=external Clock led remains off and the signal sampled is not locked (using for exemple uhd_rx_cfile, uhd_fft.mod or osmocom_fft) I solved my problem by patching my python scripts and the osmocom library, but I wanted to know if I missed something somewhere. For information, the line added to uhd_rx_cfile : (after the antenna selection code) self._u.set_clock_config(uhd.clock_config.external(), 0) And for osmocom lib : (uhd_source_c.cc, end of the constructor) _src->set_clock_source("external", 0); Version used : FW image : 003.006.002-rc2 linux; GNU C++ version 4.8.1; Boost_105300; UHD_003.006.002-64-g92b0b7ab Any feedback appreciated. Good day, Guenael _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
