Hello, If the buttons aren't working then the thing is probably locked up, try lowering the fft_rate parameter and see if that fixes things.
Andrew On Mon, Dec 23, 2013 at 3:10 PM, Paul B. Huter <paul.b.hu...@gmail.com>wrote: > I have a data file that was recorded to a RAMDisk and transferred to the > hard drive on my Linux machine. When I run it through a throttle, a filter, > and into an FFT, the file repeats. When I was running it off the RAMDisk, > it only played for the ~15 seconds of the data. I was having the problem > with repeating before I rebooted and lost the RAMDisk file (I thought maybe > having it stored in RAM, too, was causing a problem). Also, the buttons on > the FFT plot don't work (Autoscale, Stop) Can anyone provide any insight > into why the file on my hard drive is repeating? "Repeat" is set to "No" on > the file source block. > > Second question - On the FFT (same flow) how can I make it so it STARTS > viewing all the data? The FFT shows up going from 0 to 100, and the > majority of the data is negative. As mentioned, it only runs for about 15 > seconds, and even if the Autoscale button worked, I have such a small > window to view everything. It is my understanding that I can't get an > Autoscale prior to viewing the plot, but is there a way to scale it with > the parameters on the flow block (maybe set it to go from 0 to -100)? > > Thanks! > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
