The Ubuntu packages are notoriously out-of-date, and since teh UHD version you pulled has a depend on Gnu Radio 3.6.1, it installed Gnu Radio 3.6.1.
YOu might want to just start over again with pybombs, or build-gnuradio
on Nov 22, 2013, nesimi eldarov <nesaz...@mail.ru> wrote:
Hi People,
My system Ubuntu 13.04
GNURADIO 3.7.1.1
USRP N200
I run:
------------------------------------------------
cd /usr/local/src
sudo wget https://sites.google.com/site/byungchulweb/gnufile/UHD_003.003.000.tar.gz
sudo tar xvf UHD_003.003.000.tar.gz
cd uhd/host
mkdir build
cd build
cmake ../
make
make test
sudo make install
sudo ldconfig
------------------------------------------------
Then:
sudo apt-get install uhd-host
It installs:
uhd-host 3.4.2-1
with
libgnuradio-uhd3.6.1 3.6.1-1
------------------------------------------------
then I run:
sudo ifconfig eth0 192.168.10.1
uhd_usrp_probe
linux; GNU C++ version 4.7.3; Boost_105300; UHD_003.003.000-unknown-- Opening a USRP2/N-Series device...
1. The first question is why does it load libgnuradio-uhd3.6.1 3.6.1-1 instead of 3.7 version?
Error: RuntimeError:
Please update the firmware and FPGA images for your device.
See the application notes for USRP2/N-Series for instructions.
Expected protocol compatibility number [7 to 11], but got 12:
The firmware build is not compatible with the host code build.
2. it was working with GNURADIO 3.6 before, now it fails with v3.7, why?
3. How can I solve the last error message?
Thanks in advance!
--
NE
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
