Good thinking. Next hurdle is an error:
----
darren@betty:~$ osmocom_fft -F -a fcd=1 -f 7.1M
linux; GNU C++ version 4.8.1; Boost_105300; UHD_003.005.004-0-unknown
gr-osmosdr v0.1.x-xxx-xunknown (0.1.1git) gnuradio 3.7.1
built-in source types: file osmosdr fcd rtl rtl_tcp uhd hackrf bladerf
netsdr
Using FUNcube Dongle V2.0 (hw:3)
Opened: hw:3
Using Volk machine: sse4_2_64_orc
Dongle sucessfully initialized
Result of Action :+++++
FCDAPP 20.03
Lna gain enabled
Mixer gain enabled
If gain set to: 15
If gain set to: 15
Set Frequency to: 7.1e+06 Hz, corrected to: 7100000 Hz
[xcb] Unknown request in queue while dequeuing
[xcb] Most likely this is a multi-threaded client and XInitThreads has
not been called
[xcb] Aborting, sorry about that.
python2: ../../src/xcb_io.c:179: dequeue_pending_request: Assertion
`!xcb_xlib_unknown_req_in_deq' failed.
Aborted (core dumped)
----
Cheers,
Darren
On 27/10/13 15:07, Sylvain Munaut wrote:
Hi Darren,
I can't get osmocom_fft to run, due to a problem inporting fosphor. It runs
OK without the -F argument. Not sure what is wrong yet. Everything seemed
to build and install OK. Please see the output below. Also, should there be
any new blocks in grc?
You need to install in the same prefix as gnuradio itself is installed
for it to work.
So if the PPA install GR in /usr you'll need to use
-DCMAKE_INSTALL_PREFIX=/usr on the cmake line
Cheers,
Sylvain
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
