Lin,
actually it is under the building please check here CORNET.
~Dilip
Date: Thu, 15 Aug 2013 19:49:38 +0800
Subject: Re: [USRP-users] best transmitter/receiver setup for large coverage
From: huanglin.b...@gmail.com
To: palpa5b...@hotmail.com
CC: discuss-gnuradio@gnu.org; usrp-us...@lists.ettus.com
1 km is a long distance, so the lower frequency, the less pathloss. Use maximum
tx gain and rx gain. And the distance may highly depend on the environment. Is
there buildings, trees, or just a blank space?
Lin
2013/8/15 dilip thapa <palpa5b...@hotmail.com>
Hi,
I am using usrp2 and gnuradio 3.3.0.
I want to use benchmark_tx.py as transmitter and benchmark_rx.py as receiver.
so that multiple receiver at distance of around 1 KM should get good signal
strength.
So could you please let me know the best options for tx and rx waveform, so I
could get the maximum range of coverage.
best options means:
transmitter frequency, tx gain, tx amplitude and rx-gain, if there is any other
then let me know.
I need this to do spectrum sensing with energy detection.
with Thanks,
Dilip
_______________________________________________
USRP-users mailing list
usrp-us...@lists.ettus.com
http://lists.ettus.com/mailman/listinfo/usrp-users_lists.ettus.com
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
