On Wed, May 15, 2013 at 2:53 AM, Firas Serrge <elec.serr...@gmail.com> wrote: > hello , > i am new in usrp and GNU radio ,... > i have usrp n210 and wbx (50-2200 Mhz) daughter board , > i have installed GRC on Ubuntu 12.04 LTS , > i wrote the .GRC file and generate the python code ... > when i use my hardware to transmit a signals using ( usrp sink ) .... there > are interface and a signal will appears and no problems... > > but when i 'm trying to receive signals (FM signals for example ) ,... , in > the usrp n210 motherboard .. the led C ( receiving) is on , but in the > graphical interface .. no signal appear ... > also i used the command ( " iptraf " ) to view if there are a traffic on the > interface eth0 , > there are traffic but the software dosen't comprehend the receiving Data , > > // UDP (52 bytes) from 192.168.10.20:49157 to 192.168.10.1:47842 on eth0 > // UDP (52 bytes) from 192.168.10.20:49157 to 192.168.10.1:47842 on eth0 > > please help me .. i don't know why no signal appears in GUI .... > > how may i receive signal ? and is there another method to receive signal? > > thanks you lot .
Are you sure there should be a signal where you are looking? Have to tried to adjust the gain of the USRP receiver? Tom _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
