All,
I am trying to modify the USRP N200 FPGA so as to mute the ADC when TX section
is enabled inside my flow graph. However, when I try to build the
usrp_n200_r3_fpga.bin file, I get below error message which I don't understand:
l-ece109:N2x0$ make -f Makefile.N200R3 bin
python
/nfs/s-l011/local/vol02/m/mrahmn/Desktop/UHD/uhd/fpga/usrp2/top/python/check_inout.py
u2plus.v u2plus.ucf
No errors found.
xtclsh
/nfs/s-l011/local/vol02/m/mrahmn/Desktop/UHD/uhd/fpga/usrp2/top/tcl/ise_helper.tcl
"Check Syntax"
>>> Opening project:
>>> /nfs/s-l011/local/vol02/m/mrahmn/Desktop/UHD/uhd/fpga/usrp2/top/N2x0/build-N200R3/u2plus.xise
Changed current working directory to the project directory:
"/nfs/s-l011/local/vol02/m/mrahmn/Desktop/UHD/uhd/fpga/usrp2/top/N2x0/build-N200
R3"
>>> Running Process: Check Syntax
WARNING:TclTasksC:2147 - The default top is not set.
ERROR:TclTasksC:process_082: Default top is empty or is not set. Process "Check
Syntax" is not applicable at this point.
false
while executing
"process run [lindex $argv 0]"
invoked from within
"if [string compare [lindex $argv 0] ""] {
puts ">>> Running Process: [lindex $argv 0]"
process run [lindex $argv 0]
}"
(file
"/nfs/s-l011/local/vol02/m/mrahmn/Desktop/UHD/uhd/fpga/usrp2/top/tcl/ise_helper.tcl"
line 86)
make: *** [check] Error 1
Any ideas on how to fix this?
Thanks in anticipation,
Mahboob
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
