Some additional information..
> When I run make test I get the following failures:
>
>
> 22/192 Test #22: qa_fft_filter ....................***Failed 1.05 sec
> 85/192 Test #85: test_gr_filter ...................***Failed 0.27 sec
> 91/192 Test #91: qa_fft_filter ....................***Failed 1.11 sec
> 92/192 Test #92: qa_hilbert .......................***Failed 1.09 sec
> 93/192 Test #93: qa_filter_delay_fc ...............***Failed 1.10 sec
> 94/192 Test #94: qa_pfb_arb_resampler .............***Failed 1.13 sec
> 95/192 Test #95: qa_rational_resampler ............***Failed 1.23 sec
> 97/192 Test #97: qa_fir_filter ....................***Failed 1.23 sec
> 114/192 Test #114: qa_ctcss_squelch .................***Failed 1.21 sec
> My question is how should I go about diagnosing the problems?
>
> Thank you,
> Brian Stamper
I have since learned about running the individual tests verbosely, like so:
ctest -V -R qa_fft_filter
I found that each of the tests listed above leads to a segmentation fault,
EXCEPT for the ca_ctcss_squelch test, which gives two assertion errors:
Start 114: qa_ctcss_squelch
114: Test command: /bin/sh
"/home/brian/SDR/gnuradio/build/gr-analog/python/qa_ctcss_squelch_test.sh"
114: Test timeout computed to be: 9.99988e+06
114: .FF
114: ======================================================================
114: FAIL: test_ctcss_squelch_002 (__main__.test_ctcss_squelch)
114: ----------------------------------------------------------------------
114: Traceback (most recent call last):
114: File "/home/brian/SDR/gnuradio/gr-analog/python/qa_ctcss_squelch.py",
line 81, in test_ctcss_squelch_002
114: self.assertFloatTuplesAlmostEqual(expected_result, result_data, 4)
114: File
"/home/brian/SDR/gnuradio/gnuradio-core/src/python/gnuradio/gr_unittest.py",
line 85, in assertFloatTuplesAlmostEqual
114: self.assertEqual (len(a), len(b))
114: AssertionError: 39 != 31
114:
114: ======================================================================
114: FAIL: test_ctcss_squelch_003 (__main__.test_ctcss_squelch)
114: ----------------------------------------------------------------------
114: Traceback (most recent call last):
114: File "/home/brian/SDR/gnuradio/gr-analog/python/qa_ctcss_squelch.py",
line 106, in test_ctcss_squelch_003
114: self.assertFloatTuplesAlmostEqual(expected_result, result_data, 4)
114: File
"/home/brian/SDR/gnuradio/gnuradio-core/src/python/gnuradio/gr_unittest.py",
line 87, in assertFloatTuplesAlmostEqual
114: self.assertAlmostEqual (a[i], b[i], places, msg)
114: AssertionError: 0.8 != 0.0 within 4 places
114:
114: ----------------------------------------------------------------------
114: Ran 3 tests in 0.012s
114:
114: FAILED (failures=2)
1/1 Test #114: qa_ctcss_squelch .................***Failed 1.22 sec
Hopefully this additional information is helpful.
Thanks,
Brian
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
