Josh thanks so much for the suggestion.
I left the tb.run() alone, and used the default settings for the
uhd_usrp_probe --args call for setting the frame size and number of
frames.
I also just changed the buffer size for the usrp_source block by
setting the following before the tb.run():
tb.uhd_usrp_source_0.set_max_output_buffer(50000000) and I was
getting overruns still. I also tried setting it higher to
500000000 and still got overruns within about 10-20 seconds.
Do you have any other quick suggestions? I just went back to testing
on the older gnuradio libusrp 4 channel version and ubuntu 10.04 for
longer durations. It gives no overruns up until about 30 minutes of
running. This is at least usable. I wonder if the buffer settings on
the older setup is higher then newer one. I'm not sure how to
determine this.
Thanks, -Tom
The frame size and number of frames settings are per-session, so setting
them in uhd_usrp_probe will have no effect, as far as I know, on
future sessions.
--
Marcus Leech
Principal Investigator
Shirleys Bay Radio Astronomy Consortium
http://www.sbrac.org
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
