Hi, Yep, only the USRP stuff.
I already had removed the headers and in fact everything that looked like gnuradio and USRP, without any change, still the same problem. Ralph. > -----Original Message----- > From: Josh Blum [mailto:j...@joshknows.com] On Behalf Of Josh Blum > Sent: Friday, 08 February, 2013 19:20 > To: Ralph A. Schmid, dk5ras > Cc: discuss-gnuradio@gnu.org > Subject: Re: [Discuss-gnuradio] Build fails > > > > On 02/08/2013 04:18 AM, Ralph A. Schmid, dk5ras wrote: > > Hi, > > > > I got the error by installing the latest release, should be 3.6.3, > > although in the output sometimes the 3.6.4 repository was mentioned. > > And as I have told there already is a partial install of 3.4.2 that is > > necessary for the openbts package. So I just may remove this and > > install the newer version > > I think this partial install is just the usrp component, not gnuradio runtime or > anything. However, If thats not the case, you might want to uninstall/move > the installed headers temporarily just in case to confirm if thats causing the > issue or not. > > -josh > > > > Ralph. > > > >> -----Original Message----- > >> From: discuss-gnuradio-bounces+ralph=schmid....@gnu.org > >> [mailto:discuss-gnuradio-bounces+ralph=schmid....@gnu.org] On Behalf > >> Of Josh Blum > >> Sent: Friday, February 08, 2013 9:49 AM > >> To: discuss-gnuradio@gnu.org > >> Subject: Re: [Discuss-gnuradio] Build fails > >> > >> > >> > >> On 02/08/2013 02:08 AM, Ralph A. Schmid, dk5ras wrote: > >>> Hi, > >>> > >>> On a relatively fresh installed Kubuntu 12.04 LTS 32bit x86 with all > >>> updates the build of gnuradio fails. I am using the build script, > >>> but also the manual build fails in a similar way. Already installed > >>> on the machine is a partial gnuradio 3.4.2 for OpenBTS support, > >>> together with > >>> USRP1 drivers, yate PBX. This stuff built without problems and works > > just > >> fine. > >>> > >>> See the messages at the bottom of the mail. > >>> > >>> I am normally a Win user and far from being a linux pro, but I do > >>> not fear the command line and editing files. Reminds me a bit of > >>> good old Amiga times > >>> :-) > >>> > >>> Any ideas what I should do? > >>> > >> > >> Someone had this exact same error in a private email but we never got > >> to > > the > >> bottom of it. > >> > >> Was there a previous install of gnuradio by any chance (in case > >> something > > is > >> accidentally building against installed headers)? > >> > >> It may be the case that a recent change is adding an extra typdef or > > template > >> to a swig .i file and swig is being dumb and exporting it twice. > >> > >> Or maybe its one of those things that shows up on an x86 machine vs > >> x64 > > due > >> to how integer types map to fixed width typedefs... So many ways to > >> fail > > :-) > >> > >> So, what version of gnuradio produced the errors below? It wasnt the > > 3.4.2, > >> right? > >> > >> Can you attach the culprit gnuradio_core_generalPYTHON_wrap.cxx > >> > >> -josh > >> > >>> Thanks a lot, and with best regards > >>> > >>> Ralph. > >>> > >>> These are the scripts last words: > >>> > >>> [ 39%] Building CXX object > >>> gnuradio- > >> core/src/lib/swig/CMakeFiles/_gnuradio_core_general.dir/gnuradio_co > >>> re_generalPYTHON_wrap.cxx.o > >>> /home/ras/gnuradio/build/gnuradio- > >> core/src/lib/swig/gnuradio_core_gene > >>> ralPYT > >>> HON_wrap.cxx:6067:22: error: redefinition of struct > >>> swig::traits<unsigned > >>> int> > >>> /home/ras/gnuradio/build/gnuradio- > >> core/src/lib/swig/gnuradio_core_gene > >>> ralPYT > >>> HON_wrap.cxx:5493:22: error: previous definition of struct > >>> swig::traits<unsigned int> > >>> /home/ras/gnuradio/build/gnuradio- > >> core/src/lib/swig/gnuradio_core_gene > >>> ralPYT > >>> HON_wrap.cxx:6071:23: error: redefinition of struct > >>> swig::traits_asval<unsigned int> > >>> /home/ras/gnuradio/build/gnuradio- > >> core/src/lib/swig/gnuradio_core_gene > >>> ralPYT > >>> HON_wrap.cxx:5497:23: error: previous definition of struct > >>> swig::traits_asval<unsigned int> > >>> /home/ras/gnuradio/build/gnuradio- > >> core/src/lib/swig/gnuradio_core_gene > >>> ralPYT > >>> HON_wrap.cxx:6077:23: error: redefinition of struct > >>> swig::traits_from<unsigned int> > >>> /home/ras/gnuradio/build/gnuradio- > >> core/src/lib/swig/gnuradio_core_gene > >>> ralPYT > >>> HON_wrap.cxx:5503:23: error: previous definition of struct > >>> swig::traits_from<unsigned int> > >>> /home/ras/gnuradio/build/gnuradio- > >> core/src/lib/swig/gnuradio_core_gene > >>> ralPYT > >>> HON_wrap.cxx:6087:22: error: redefinition of struct > >>> swig::traits<std::vector<unsigned int> > > >>> /home/ras/gnuradio/build/gnuradio- > >> core/src/lib/swig/gnuradio_core_gene > >>> ralPYT > >>> HON_wrap.cxx:5513:22: error: previous definition of struct > >>> swig::traits<std::vector<unsigned int> > > >>> make[2]: *** > >>> [gnuradio-core/src/lib/swig/CMakeFiles/_gnuradio_core_general.dir/gn > >>> ur > >>> adio_c > >>> ore_generalPYTHON_wrap.cxx.o] Error 1 > >>> make[1]: *** > >>> [gnuradio-core/src/lib/swig/CMakeFiles/_gnuradio_core_general.dir/al > >>> l] > >>> Error > >>> 2 > >>> make: *** [all] Error 2 > >>> make failed > >>> Exiting Gnu Radio build/install > >>> > >>> > >>> -- > >>> > >>> Ralph A. Schmid > >>> Mondstr. 10 > >>> 90762 Fürth > >>> +49-171-3631223 > >>> ra...@schmid.xxx > >>> http://www.bclog.de/ > >>> > >>> > >>> > >>> _______________________________________________ > >>> Discuss-gnuradio mailing list > >>> Discuss-gnuradio@gnu.org > >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > >>> > >> > >> _______________________________________________ > >> Discuss-gnuradio mailing list > >> Discuss-gnuradio@gnu.org > >> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio > > _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
