On Dec 18, 2012, at 3:52 AM, Martin Braun (CEL) <martin.br...@kit.edu> wrote:
> On Tue, Dec 18, 2012 at 01:27:16AM -0500, Tommy Tracy II wrote:
>> I'm looking to write c++ gnuradio blocks using the gr-howto-write-a-block
>> code
>> that comes with gnuradio. Unfortunately, when I do the build with the
>> existing
>> code, the tests fail. Has anyone else seen this?
>
> I haven't (and it shouldn't fail). Comments:
>
> 1) Don't use 'sudo' for cmake and make test, unless really necessary.
> 2) You can build gr-howto-... for educational purposes, but I strongly
> recommend using gr-modtool instead.
> 3) In general, if a test fails, use 'ctest -V -R <+REGEX+>' to obtain
> the output of the failed test.
> Provide that in any email here.
>
> MB
1. Thank you for your advice. I went through and changed ownership to my user
name, and I will only use sudo for installation.
2. I still want to figure out why gr-howto-… is failing, but I have installed
gr-modtool and will be using it.
Does anyone know of a good tutorial for this package? I wrote my work
function, but I'm not sure how to write a test.
3. I tried using ctest and got the following error:
----------
ttracy@ubuntu:~/Documents/src/gnuradio/gr-howto-write-a-block/build$ ctest -V
-R qa_howto
UpdateCTestConfiguration from
:/home/ttracy/Documents/src/gnuradio/gr-howto-write-a-block/build/DartConfiguration.tcl
UpdateCTestConfiguration from
:/home/ttracy/Documents/src/gnuradio/gr-howto-write-a-block/build/DartConfiguration.tcl
Test project /home/ttracy/Documents/src/gnuradio/gr-howto-write-a-block/build
Constructing a list of tests
Done constructing a list of tests
Checking test dependency graph...
Checking test dependency graph end
test 1
Start 1: qa_howto_square_ff
1: Test command: /bin/sh
"/home/ttracy/Documents/src/gnuradio/gr-howto-write-a-block/build/lib/qa_howto_square_ff_test.sh"
1: Test timeout computed to be: 9.99988e+06
1: Running 2 test cases...
1:
1: *** No errors detected
1/3 Test #1: qa_howto_square_ff ............... Passed 0.00 sec
test 2
Start 2: qa_howto_square2_ff
2: Test command: /bin/sh
"/home/ttracy/Documents/src/gnuradio/gr-howto-write-a-block/build/lib/qa_howto_square2_ff_test.sh"
2: Test timeout computed to be: 9.99988e+06
2: Running 2 test cases...
2:
2: *** No errors detected
2/3 Test #2: qa_howto_square2_ff .............. Passed 0.00 sec
test 3
Start 3: qa_howto
3: Test command: /bin/sh
"/home/ttracy/Documents/src/gnuradio/gr-howto-write-a-block/build/python/qa_howto_test.sh"
3: Test timeout computed to be: 9.99988e+06
3: Traceback (most recent call last):
3: File
"/home/ttracy/Documents/src/gnuradio/gr-howto-write-a-block/python/qa_howto.py",
line 23, in <module>
3: from gnuradio import gr, gr_unittest
3: File "/usr/local/lib/python2.7/dist-packages/gnuradio/gr/__init__.py",
line 27, in <module>
3: from gnuradio_core import *
3: File
"/usr/local/lib/python2.7/dist-packages/gnuradio/gr/gnuradio_core.py", line 23,
in <module>
3: from gnuradio_core_runtime import *
3: File
"/usr/local/lib/python2.7/dist-packages/gnuradio/gr/gnuradio_core_runtime.py",
line 26, in <module>
3: _gnuradio_core_runtime = swig_import_helper()
3: File
"/usr/local/lib/python2.7/dist-packages/gnuradio/gr/gnuradio_core_runtime.py",
line 22, in swig_import_helper
3: _mod = imp.load_module('_gnuradio_core_runtime', fp, pathname,
description)
3: ImportError: libgnuradio-core-3.6.3git.so.0.0.0: cannot open shared object
file: No such file or directory
3/3 Test #3: qa_howto .........................***Failed 0.05 sec
The following tests passed:
qa_howto_square_ff
qa_howto_square2_ff
67% tests passed, 1 tests failed out of 3
Total Test time (real) = 0.06 sec
The following tests FAILED:
3 - qa_howto (Failed)
Errors while running CTest
----------
It appears that qa_howto failed because of a missing module.
>
>
>>
>> I'm running Ubuntu 12.10.
>>
>>
>> ----------
>>
>> ttracy@ubuntu:~/Documents/src/gnuradio/gr-howto-write-a-block/build$ sudo
>> cmake
>> ../
>>
>> -- The CXX compiler identification is GNU 4.7.2
>>
>> -- The C compiler identification is GNU 4.7.2
>>
>> -- Check for working CXX compiler: /usr/bin/c++
>>
>> -- Check for working CXX compiler: /usr/bin/c++ -- works
>>
>> -- Detecting CXX compiler ABI info
>>
>> -- Detecting CXX compiler ABI info - done
>>
>> -- Check for working C compiler: /usr/bin/gcc
>>
>> -- Check for working C compiler: /usr/bin/gcc -- works
>>
>> -- Detecting C compiler ABI info
>>
>> -- Detecting C compiler ABI info - done
>>
>> -- Build type not specified: defaulting to release.
>>
>> -- Boost version: 1.49.0
>>
>> -- Found PkgConfig: /usr/bin/pkg-config (found version "0.26")
>>
>> -- checking for module 'gruel'
>>
>> -- found gruel, version 3.6.3git
>>
>> -- Found GRUEL: /usr/local/lib/libgruel.so
>>
>> -- checking for module 'gnuradio-core'
>>
>> -- found gnuradio-core, version 3.6.3git
>>
>> -- Found GNURADIO_CORE: /usr/local/lib/libgnuradio-core.so
>>
>> -- Boost version: 1.49.0
>>
>> -- Found the following Boost libraries:
>>
>> -- unit_test_framework
>>
>> -- Found SWIG: /usr/bin/swig2.0 (found version "2.0.7")
>>
>> -- Found PythonLibs: /usr/lib/python3.2/config/libpython3.2.so (found version
>> "2.7.3")
>>
>> -- Found PythonInterp: /usr/bin/python (found version "2.7.3")
>>
>> -- Found Doxygen: /usr/bin/doxygen (found version "1.8.1.2")
>>
>> -- Configuring done
>>
>> -- Generating done
>>
>> -- Build files have been written to: /home/ttracy/Documents/src/gnuradio/
>> gr-howto-write-a-block/build
>>
>> ttracy@ubuntu:~/Documents/src/gnuradio/gr-howto-write-a-block/build$ sudo
>> make
>>
>> Scanning dependencies of target gnuradio-howto
>>
>> [ 5%] Building CXX object lib/CMakeFiles/gnuradio-howto.dir/
>> howto_square_ff.cc.o
>>
>> [ 10%] Building CXX object lib/CMakeFiles/gnuradio-howto.dir/
>> howto_square2_ff.cc.o
>>
>> Linking CXX shared library libgnuradio-howto.so
>>
>> [ 10%] Built target gnuradio-howto
>>
>> Scanning dependencies of target qa_howto_square2_ff
>>
>> [ 15%] Building CXX object lib/CMakeFiles/qa_howto_square2_ff.dir/
>> qa_howto_square2_ff.cc.o
>>
>> Linking CXX executable qa_howto_square2_ff
>>
>> [ 15%] Built target qa_howto_square2_ff
>>
>> Scanning dependencies of target qa_howto_square_ff
>>
>> [ 20%] Building CXX object lib/CMakeFiles/qa_howto_square_ff.dir/
>> qa_howto_square_ff.cc.o
>>
>> Linking CXX executable qa_howto_square_ff
>>
>> [ 20%] Built target qa_howto_square_ff
>>
>> Scanning dependencies of target _howto_swig_swig_tag
>>
>> [ 25%] Building CXX object swig/CMakeFiles/_howto_swig_swig_tag.dir/
>> _howto_swig_swig_tag.cpp.o
>>
>> Linking CXX executable _howto_swig_swig_tag
>>
>> [ 25%] Built target _howto_swig_swig_tag
>>
>> Scanning dependencies of target _howto_swig_doc_tag
>>
>> [ 30%] Building CXX object swig/CMakeFiles/_howto_swig_doc_tag.dir/
>> _howto_swig_doc_tag.cpp.o
>>
>> Linking CXX executable _howto_swig_doc_tag
>>
>> [ 30%] Built target _howto_swig_doc_tag
>>
>> [ 35%] Generating doxygen xml for howto_swig_doc docs
>>
>> [ 40%] Generating howto_swig_doc.i
>>
>> [ 45%] Generating howto_swig.tag
>>
>> [ 50%] Swig source
>>
>> Scanning dependencies of target _howto_swig
>>
>> [ 55%] Building CXX object swig/CMakeFiles/_howto_swig.dir/
>> howto_swigPYTHON_wrap.cxx.o
>>
>> Linking CXX shared module _howto_swig.so
>>
>> [ 55%] Built target _howto_swig
>>
>> Scanning dependencies of target pygen_swig_cc723
>>
>> [ 60%] Generating howto_swig.pyc
>>
>> [ 65%] Generating howto_swig.pyo
>>
>> [ 85%] Built target pygen_swig_cc723
>>
>> Scanning dependencies of target pygen_python_257bc
>>
>> [ 90%] Generating __init__.pyc
>>
>> [ 95%] Generating __init__.pyo
>>
>> [ 95%] Built target pygen_python_257bc
>>
>> Scanning dependencies of target pygen_apps_58acf
>>
>> [100%] Shebangin howto_square.py
>>
>> [100%] Built target pygen_apps_58acf
>>
>> ttracy@ubuntu:~/Documents/src/gnuradio/gr-howto-write-a-block/build$ sudo
>> make
>> test
>>
>> Running tests...
>>
>> Test project /home/ttracy/Documents/src/gnuradio/gr-howto-write-a-block/build
>>
>> Start 1: qa_howto_square_ff
>>
>> 1/3 Test #1: qa_howto_square_ff ............... Passed 0.01 sec
>>
>> Start 2: qa_howto_square2_ff
>>
>> 2/3 Test #2: qa_howto_square2_ff .............. Passed 0.01 sec
>>
>> Start 3: qa_howto
>>
>> 3/3 Test #3: qa_howto .........................***Failed 0.14 sec
>>
>>
>> 67% tests passed, 1 tests failed out of 3
>>
>>
>> Total Test time (real) = 0.15 sec
>>
>>
>> The following tests FAILED:
>>
>> 3 - qa_howto (Failed)
>>
>> Errors while running CTest
>>
>> make: *** [test] Error 8
>>
>> ----------
>>
>>
>>
>> Sincerely,
>>
>> Tommy James Tracy II
>>
>> PhD Student
>>
>> High Performance Low Power Lab
>>
>> University of Virginia
>>
>>
>
>> _______________________________________________
>> Discuss-gnuradio mailing list
>> Discuss-gnuradio@gnu.org
>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
>
>
> --
> Karlsruhe Institute of Technology (KIT)
> Communications Engineering Lab (CEL)
>
> Dipl.-Ing. Martin Braun
> Research Associate
>
> Kaiserstraße 12
> Building 05.01
> 76131 Karlsruhe
>
> Phone: +49 721 608-43790
> Fax: +49 721 608-46071
> www.cel.kit.edu
>
> KIT -- University of the State of Baden-Württemberg and
> National Laboratory of the Helmholtz Association
> _______________________________________________
> Discuss-gnuradio mailing list
> Discuss-gnuradio@gnu.org
> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
