Hi Alex,
Thanks for the videos, I had seen some of them before, I am not sure we are
using the same modules, the one i am using a much smaller one like the image I
have attached.
I am 'playing' with the different parameters today and hopefully I can get some
good results from it. My signals are really weak (about -90db with strong FM
channel).
BR,
Farhad
>________________________________
> From: Alexandru Csete <oz9...@gmail.com>
>To: "Discuss-gnuradio@gnu.org" <Discuss-gnuradio@gnu.org>
>Sent: Sunday, April 15, 2012 12:10 PM
>Subject: Re: [Discuss-gnuradio] First try with RTL2832
> Hi Farhad,
>
>
>As you may have seen in my on air tests I just posted, I have no problem with
>low signal levels, however, there is an active hardware AGC which may be
>causing you troubles. If you have a strong signal in the analog passband of
>the tuner it will drive the gain down and the weaker signal you are trying to
>receive will become noisy. You can see that in all 3 videos which show an
>EzCAP666 with E4000 tuner in action.
>
>I don't know if this AGC is in the RTL chip or the E4000 tuner. I suspect it
>is in the tuner.
>
>Alex
>
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
