Try:
uhd_usrp_probe --args "type=usrp1" Then uhd_usrp_probe --args "addr=192.168.10.2" That should (assuming you have networking setup correctly) give you probe outputs from both your USRP1 and N200. On Tue, 27 Mar 2012 16:06:05 +0100 (BST), Noé Beuret wrote: > Hi! > > I have not managed to install what I wanted for my school project. > After gnuradio and uhd installation with the build_gnuradio script, uhd_find_device found only usrp n200 but not usrp1... > > I didn't have much time so I wouldn't touch anything in the first software. So I would start writing the second software even if the work environment is not perfect. I hope that problems will be resolved later > > My professor give me this : > 1 USRP1 > 1 USRP N200 > 1 software that use gnuradio-3.2.2 > > Now I have to write software that uses UHD and works in parallel with the first software. > > The objective of this second software is to use the usrp n200 to emit a cosinus signal that have a span of 1MHz. > Somebody can help me to start with this UHD project? Where can I find a tutorial (or examples) for writing uhd application? > > Thanks a lot in advance! > > Noé > > ------------------------- > DE : "mle...@ripnet.com" > À : discuss-gnuradio@gnu.org > ENVOYÉ LE : Vendredi 23 mars 2012 15h55 > OBJET : Re: [Discuss-gnuradio] Use USRP1 and USRP N200 at the same time > > Conversion to UHD should be too hard. You generally don't have to touch the "guts", just the source/sink blocks. > -Marcus > > On Fri, 23 Mar 2012 15:29:26 +0100, Noé Beuret wrote: > >> Hi Marcus, >> >> Thanks for your response. >> >> If I would use an old version of GNURadio it's because a software that I need use it with USRP1. I'm afraid that this software doesn't work if I use a newest gnuradio version or UHD. >> >> Noé >> >> DE : discuss-gnuradio-bounces+noe_beuret=yahoo...@gnu.org [mailto:discuss-gnuradio-bounces+noe_beuret=yahoo...@gnu.org] DE LA PART DE mle...@ripnet.com >> ENVOYÉ : vendredi 23 mars 2012 15:04 >> À : discuss-gnuradio@gnu.org >> OBJET : Re: [Discuss-gnuradio] Use USRP1 and USRP N200 at the same time >> >> USRP1 works just fine with the very-latest Gnu Radio and UHD just fine--I ran one that way just the other night. So you can run build-gnuradio to download the very latest UHD and Gnu Radio and it'll work just fine with both your N210 and your USRP1. >> There's absolutely no reason for a new user such as yourself to use any of the "classic" API for USRP1. Just use UHD for everything. >> Yes, you should be able to use two uhd_fft.py -- one setup to talk to your N210 and the other setup to talk to your USRP1, that should work just fine. >> -Marcus >> >> On Fri, 23 Mar 2012 14:38:55 +0100, Noé Beuret wrote: >> >>> Hi! >>> >>> Thanks a lot for your response. >>> >>> Last week I tried to install the latest version of GNURadio and UHD with the script provided by Marcus Leech, but I read somewhere that GNURadio version need to be between 3.3 and 3.5 for working with USRP1 because newer version don't use libusrp... It is right? >>> >>> And it's not a problem to use both USRPs at the same time without conflict? For trying, it is possible to run uhd_fft.py and usrp_fft.py together? >>> >>> Thanks ;-) >>> >>> Noé >>> >>> -----Message d'origine----- >>> >>> De : discuss-gnuradio-bounces+noe_beuret=yahoo...@gnu.org [1] [mailto:discuss-gnuradio-bounces+noe_beuret=yahoo...@gnu.org [2]] De la part de Martin Braun >>> >>> Envoyé : vendredi 23 mars 2012 14:25 >>> >>> À : discuss-gnuradio@gnu.org [3] >>> >>> Objet : Re: [Discuss-gnuradio] Use USRP1 and USRP N200 at the same time >>> >>> On Fri, Mar 23, 2012 at 01:51:00PM +0100, Noé Beuret wrote: >>> >>>> Hi everyone, >>>> >>>> I'm a student in a telecommunication school and I need to use GNURadio >>>> >>>> for a project. >>> >>> Cool, good luck! >>> >>>> I have two USRP : 1 USRP1 (USB interface) and 1 USRP N200 (ethernet interface). >>>> >>>> The USRP1 works with a software that use GNURadio 3.2.2. >>> >>> ...it also works with a current version (unless you've done something super funky to it). >>> >>> Now, I need t> ; >>>> >>>> What GNURadio and UHD version I need? It is possible to keep GNURadio >>>> >>>> 3.2.2, install UHD and use both USRPs at the same time without conflict? >>>> >>>> 3.2.2 is ancient. Unless you have a really, really good reason, don't use it. Grab the newest version of both UHD and GNU Radio and *then* start your project. >>> ; >>> >>> MB >>> >>> -- >>> >>> Karlsruhe Institute of Technology (KIT) >>> >>> Communications Engineering Lab (CEL) >>> >>> Dipl.-Ing. Martin Braun >>> >>> Research Associate >>> >>> Kaiserstraße 12 >>> >>> Building 05.01 >>> >>> 76131 Karlsruhe >>> >>> Phone: +49 721 608-43790 >>> >>> Fax: +49 721 608-46071 >>> >>> www.cel.kit.edu [4] >>> >>> KIT -- University of the State of Baden-Württemberg and National Laboratory of the Helmholtz Association >>> >>> _______________________________________________ >>> >>> Discuss-gnuradio mailing list >>> >>> Discuss-gnuradio@gnu.org [5] >>> >>> https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [6] > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org [7] > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [8] Links: ------ [1] mailto:discuss-gnuradio-bounces+noe_beuret=yahoo...@gnu.org [2] mailto:discuss-gnuradio-bounces+noe_beuret=yahoo...@gnu.org [3] mailto:discuss-gnuradio@gnu.org [4] http://www.cel.kit.edu [5] mailto:Discuss-gnuradio@gnu.org [6] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio [7] mailto:Discuss-gnuradio@gnu.org [8] https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
