Il 04/03/12 00:18, Carles Fernandez ha scritto:
Hi guys,
On OSX 10.6.8 I did the following:
$ git clone git://code.ettus.com/ettus/uhd.git
$ cd uhd
$ mkdir build
$ cd build
$ cmake ../
$ make
$ sudo make install
$ cd..
$ git clone git://gnuradio.org/gnuradio
$ cd gnuradio
$ mkdir build
$ cd build cmake ../
...
-- ######################################################
-- # Gnuradio enabled components
-- ######################################################
-- * python-support
-- * testing-support
-- * volk
-- * doxygen
-- * gruel
-- * gnuradio-core
-- * gr-atsc
-- * gr-audio
-- * gr-digital
-- * gr-noaa
-- * gr-pager
-- * gr-qtgui
-- * gr-trellis
-- * gr-uhd
-- * gr-utils
-- * gr-video-sdl
-- * gr-vocoder
--
-- ######################################################
-- # Gnuradio disabled components
-- ######################################################
-- * gnuradio-companion
-- * gr-comedi
-- * gr-shd
-- * gr-wxgui
--
-- Using install prefix: /usr/local
-- Building for version: v3.5.1-196-g4f0add17 / 3.5.2git
-- Configuring done
-- Generating done
...
$ make
$ sudo make install
It seems that worked! :-)
Best regards,
Carles
On Fri, Mar 2, 2012 at 3:45 PM, Michael Dickens<m...@alum.mit.edu> wrote:
On Mar 2, 2012, at 9:39 AM, Arturo Rinaldi wrote:
can i build the master git branch on macos X 10.7.3 with cmake ? have i to
satisfy the build pre-requisites with macports as usual ?
Hi Arturo - I believe that if you use MacPorts to install the background dependencies --
just do "sudo port install gnuradio", and then, hours later, you can remove the
installed GNU Radio / usrp ports, if any actually got installed. You'll need to install
CMake too, since the current GR ports still use GNU Autotools. You should then be able
to use CMake to build GNU Radio from the GIT master on OSX 10.7.3. I'm still using
10.6.8, but I know others who've used 10.7 and had success. Getting the dependencies to
install is the tricky part, as always :) Give it a whirl, good luck, and please do let
me/the list know if you have issues. - MLD
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
I think i've sorted out the dependencies for building gnuradio on Lion
10.7.3
/sudo port install boost icu cppunit fftw-3-single gawk \
readline gsl texinfo guile python27 py27-numpy py27-nose py27-distribute \
libsndfile portaudio py27-opengl py27-opengl-accelerate py27-pil lcms
py27-tkinter \
py27-wxpython wxWidgets mesa makedepend xorg-dri2proto xorg-glproto
xorg-libXmu \
py27-cheetah py27-gtk libglade2 py27-cairo py27-py py27-gobject
py27-lxml doxygen \
libusb-legacy sdcc29 gputils py27-pyqt4 py27-sip py27-pyqwt qt4-mac dbus
libmng qt4-mac qwtplot3d qwt52 libsdl/
However :
*First *
/py27-wxpython/ doesn't install on macports. I'll post it on the
macports mailing list then we aren't able to use the wxgui module
*Second*
by using autotools with /
./configure LDFLAGS="-L/opt/local/lib" CPPFLAGS="-I/opt/local/include"
CC=clang --disable-gr-qtgui --disable-docs/
builds the latest tarball (3.5.2.1) and i need some help for the
*DYLD_LIBRARY_PATH* because gnuradio-companion start with an error
message though *PYTHONPATH* is correctly set
*Third*
downloaded the git version and after the usual steps with cmake, the
building crashes at the 3% with the error
/cc1: error: unrecognized command line option "-mpopcnt"
make[2]: *** [volk/lib/CMakeFiles/volk.dir/volk_machine_sse4_a_64.c.o]
Error 1
make[1]: *** [volk/lib/CMakeFiles/volk.dir/all] Error 2
make: *** [all] Error 2/
any suggest for all the three scenarios ?
Best Regards,
Arturo Rinaldi
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
