On 02/03/2012 01:20 PM, Jiri Pittner wrote: > Hi Ben, > > thanks for the hint - with cmake, I compiled it without any problem, > including volk, using the boost-1.47.0 version. I do not have USRP > at hand over the weekend, so I remain curious whether the runtime crash > disappears, too. > > However, there is a problem: I want to use also the funcube-dongle, and > when trying to compile gr-fcd, I get errors, since cmake does not employ > libtool and the .la files are missing. gr-fcd does not support cmake so > far.
The .la files are not needed to build against a library. > My goal was to have one version of gnuradio installed, which will run both > with USRP and FCD, but it seems not possible at the moment... This should not be an issue. Libraries are libraries, doesn't matter the build system. > I am not familiar with cmake, but maybe it is not so difficult to create > files necessary for compilation of gr-fcd with cmake. If the cmake-built > gnuradio does not crash with USRP, I will probably try it. > > Thanks, > Jiri > > > On Fri, 3 Feb 2012, Ben Hilburn wrote: > >> Jiri - >> >> Just to echo Marcus, have you tried building with CMake? Many people >> find >> that the CMake build magically fixes bizarre build errors; it certainly >> does in my case! >> >> Cheers, >> Ben >> >> On Fri, Feb 3, 2012 at 8:59 AM, Jiri Pittner >> <jiri.pitt...@jh-inst.cas.cz>wrote: >> >>> Hi Volker, >>> >>> thanks for the hints. I have presently 3 versions of boost: >>> Installed versions: 1.42.0(1.42)(19:46:44 5.3.2011)(python >>> -examples) >>> 1.46.1(1.46)(23:21:11 11.5.2011)(python -examples) 1.47.0(1.47)(14:25:38 >>> 1.11.2011)(python -examples) >>> and I am using eselect to switch between. I can try to emerge --sync and >>> install boost-1.47.0-r1 (not a typo from 1.48.0-r1?). >>> I have automake 1.11.1 and autoconf 2.68. No problems with make install >>> encountered. >>> >>> Best regards, >>> Jiri >>> >>> >>> On Fri, 3 Feb 2012, Volker Schroer wrote: >>> >>> Hi Jiri, >>>> >>>> I'm using gentoo, too and it compiles with boost-1.47.0-r1. Do you have >>>> some older files of boost installed while trying to compil with 1.47 ? >>>> >>>> volk does not compile , because you have a 64 bit system. >>>> >>>> I fixed this problem by deleting line 21 in volk/gen/archs.xml before >>>> runnig boostrap >>>> The line is >>>> >>>> <overrule_val>x86_64</**overrule_val> >>>> >>>> >>>> I hope this helps. >>>> >>>> What version of automake do you use ? I'm using 1.11.2 and getting >>>> problems when running make install. >>>> >>>> I'm curious if this happents on your system, too. >>>> >>>> Volker >>>> >>>> >>>> Am 03.02.2012 11:37, schrieb Jiri Pittner: >>>> >>>>> After configuring current git version of Gnuradio as >>>>> /configure --enable-gr-uhd --enable-gr-noaa --enable-usrp2 >>>>> --enable-usrp >>>>> --enable-gr-usrp --enable-grc --enable-gr-audio-alsa >>>>> --enable-gr-trellis >>>>> --disable-volk >>>>> and running make, while boost-1.47 is installed, I am getting the >>>>> following error: >>>>> >>>>> libtool: link: ( cd ".libs" && rm -f "libgruel.la" && ln -s >>>>> "../libgruel.la" "libgruel.la" ) >>>>> /bin/sh ../../../libtool --tag=CXX --mode=link g++ -g -O2 -Wall >>>>> -Woverloaded-virtual -Wno-uninitialized -pthread -o test_gruel >>>>> test_gruel.o -lboost_thread-1_42 -lboost_system-1_42 >>>>> -lboost_filesystem-1_42 pmt/libpmt-qa.la libgruel.la -lltdl >>>>> libtool: link: g++ -g -O2 -Wall -Woverloaded-virtual >>>>> -Wno-uninitialized >>>>> -pthread -o .libs/test_gruel test_gruel.o pmt/.libs/libpmt-qa.a >>>>> -L/usr/lib64 /usr/lib64/libcppunit.so ./.libs/libgruel.so >>>>> -lboost_system-1_42 -lboost_filesystem-1_42 -lboost_thread-1_42 >>>>> /usr/lib64/libltdl.so -ldl -pthread >>>>> test_gruel.o: In function `current_path': >>>>> /usr/include/boost/filesystem/**v3/operations.hpp:348: undefined >>>>> reference >>>>> to `boost::filesystem3::detail::**current_path(boost::system::** >>>>> error_code*)' >>>>> test_gruel.o: In function >>>>> `boost::filesystem3::operator/**(boost::filesystem3::path const&, >>>>> boost::filesystem3::path const&)': >>>>> /usr/include/boost/filesystem/**v3/path.hpp:584: undefined >>>>> reference to >>>>> `boost::filesystem3::path::**operator/=(boost::filesystem3:**:path >>>>> const&)' >>>>> test_gruel.o: In function `is_directory': >>>>> /usr/include/boost/filesystem/**v3/operations.hpp:223: undefined >>>>> reference >>>>> to `boost::filesystem3::detail::**status(boost::filesystem3::**path >>>>> const&, >>>>> boost::system::error_code*)' >>>>> test_gruel.o: In function `create_directory': >>>>> /usr/include/boost/filesystem/**v3/operations.hpp:324: undefined >>>>> reference >>>>> to `boost::filesystem3::detail::**create_directory(boost::** >>>>> filesystem3::path >>>>> const&, boost::system::error_code*)' >>>>> test_gruel.o: In function >>>>> `boost::filesystem3::operator/**(boost::filesystem3::path const&, >>>>> boost::filesystem3::path const&)': >>>>> /usr/include/boost/filesystem/**v3/path.hpp:584: undefined >>>>> reference to >>>>> `boost::filesystem3::path::**operator/=(boost::filesystem3:**:path >>>>> const&)' >>>>> test_gruel.o: In function `__static_initialization_and_** >>>>> destruction_0': >>>>> /usr/include/boost/system/**error_code.hpp:214: undefined >>>>> reference to >>>>> `boost::system::generic_**category()' >>>>> /usr/include/boost/system/**error_code.hpp:215: undefined >>>>> reference to >>>>> `boost::system::generic_**category()' >>>>> /usr/include/boost/system/**error_code.hpp:216: undefined >>>>> reference to >>>>> `boost::system::system_**category()' >>>>> collect2: ld returned 1 exit status >>>>> make[7]: *** [test_gruel] Error 1 >>>>> make[7]: Leaving directory `/scratch/jiri/gnuradio/gruel/**src/lib' >>>>> >>>>> With boost-1.46 it fails the same way. With boost-1.42 it compiles, >>>>> but I am getting the aforementioned segmentation fault. >>>>> >>>>> Also, compilation with volk fails: >>>>> having boost-1.42, >>>>> ./configure --enable-gr-uhd --enable-gr-noaa --enable-usrp2 >>>>> --enable-usrp >>>>> --enable-gr-usrp --enable-grc --enable-gr-audio-alsa >>>>> --enable-gr-trellis >>>>> make -j 8: >>>>> libtool: link: ar cru .libs/libvolk_ssse3_64.a >>>>> .libs/libvolk_ssse3_64_la-**volk_machine_ssse3_64.o >>>>> libtool: link: ranlib .libs/libvolk_ssse3_64.a >>>>> libtool: link: ( cd ".libs" && rm -f "libvolk_ssse3_64.la" && ln -s >>>>> "../libvolk_ssse3_64.la" "libvolk_ssse3_64.la" ) >>>>> /bin/sh ../libtool --tag=CC --mode=link gcc -g -O2 -version-info >>>>> 0:0:0 >>>>> -lorc-0.4 -lorc-0.4 -o libvolk.la -rpath /usr/local/lib64 >>>>> libvolk_la-volk.lo libvolk_la-volk_cpu.lo >>>>> libvolk_la-volk_rank_archs.lo >>>>> libvolk_la-volk_prefs.lo libvolk_la-volk_machines.lo ../orc/ >>>>> libvolk_orc.la >>>>> libvolk_avx_only.la libvolk_ssse3_32.la libvolk_sse3_64.la >>>>> libvolk_sse2_32.la libvolk_generic.la libvolk_sse4_2_64.la >>>>> libvolk_sse4_a_64.la libvolk_avx_64.la libvolk_sse4_1_32.la >>>>> libvolk_sse2_64.la libvolk_sse4_a_32.la libvolk_sse4_2_32.la >>>>> libvolk_avx_32.la libvolk_sse2_only.la libvolk_sse4_1_64.la >>>>> libvolk_sse3_32.la libvolk_ssse3_64.la >>>>> libtool: link: gcc -shared -fPIC -DPIC .libs/libvolk_la-volk.o >>>>> .libs/libvolk_la-volk_cpu.o .libs/libvolk_la-volk_rank_**archs.o >>>>> .libs/libvolk_la-volk_prefs.o .libs/libvolk_la-volk_**machines.o >>>>> -Wl,--whole-archive ../orc/.libs/libvolk_orc.a >>>>> ./.libs/libvolk_avx_only.a >>>>> ./.libs/libvolk_ssse3_32.a ./.libs/libvolk_sse3_64.a >>>>> ./.libs/libvolk_sse2_32.a ./.libs/libvolk_generic.a >>>>> ./.libs/libvolk_sse4_2_64.a ./.libs/libvolk_sse4_a_64.a >>>>> ./.libs/libvolk_avx_64.a ./.libs/libvolk_sse4_1_32.a >>>>> ./.libs/libvolk_sse2_64.a ./.libs/libvolk_sse4_a_32.a >>>>> ./.libs/libvolk_sse4_2_32.a ./.libs/libvolk_avx_32.a >>>>> ./.libs/libvolk_sse2_only.a ./.libs/libvolk_sse4_1_64.a >>>>> ./.libs/libvolk_sse3_32.a ./.libs/libvolk_ssse3_64.a >>>>> -Wl,--no-whole-archive -lorc-0.4 -O2 -Wl,-soname >>>>> -Wl,libvolk.so.0 -o >>>>> .libs/libvolk.so.0.0.0 >>>>> /usr/lib/gcc/x86_64-pc-linux-**gnu/4.5.3/../../../../x86_64-** >>>>> pc-linux-gnu/bin/ld: >>>>> i386 architecture of input file >>>>> `./.libs/libvolk_ssse3_32.a(**libvolk_ssse3_32_la-volk_** >>>>> machine_ssse3_32.o)' >>>>> is incompatible with i386:x86-64 output >>>>> /usr/lib/gcc/x86_64-pc-linux-**gnu/4.5.3/../../../../x86_64-** >>>>> pc-linux-gnu/bin/ld: >>>>> i386 architecture of input file >>>>> >>>>> `./.libs/libvolk_sse2_32.a(**libvolk_sse2_32_la-volk_**machine_sse2_32.o)' >>>>> >>>>> is >>>>> incompatible with i386:x86-64 output >>>>> /usr/lib/gcc/x86_64-pc-linux-**gnu/4.5.3/../../../../x86_64-** >>>>> pc-linux-gnu/bin/ld: >>>>> i386 architecture of input file >>>>> `./.libs/libvolk_sse4_1_32.a(**libvolk_sse4_1_32_la-volk_** >>>>> machine_sse4_1_32.o)' >>>>> is incompatible with i386:x86-64 output >>>>> /usr/lib/gcc/x86_64-pc-linux-**gnu/4.5.3/../../../../x86_64-** >>>>> pc-linux-gnu/bin/ld: >>>>> i386 architecture of input file >>>>> `./.libs/libvolk_sse4_a_32.a(**libvolk_sse4_a_32_la-volk_** >>>>> machine_sse4_a_32.o)' >>>>> is incompatible with i386:x86-64 output >>>>> /usr/lib/gcc/x86_64-pc-linux-**gnu/4.5.3/../../../../x86_64-** >>>>> pc-linux-gnu/bin/ld: >>>>> i386 architecture of input file >>>>> `./.libs/libvolk_sse4_2_32.a(**libvolk_sse4_2_32_la-volk_** >>>>> machine_sse4_2_32.o)' >>>>> is incompatible with i386:x86-64 output >>>>> /usr/lib/gcc/x86_64-pc-linux-**gnu/4.5.3/../../../../x86_64-** >>>>> pc-linux-gnu/bin/ld: >>>>> i386 architecture of input file >>>>> `./.libs/libvolk_avx_32.a(**libvolk_avx_32_la-volk_**machine_avx_32.o)' >>>>> >>>>> is >>>>> incompatible with i386:x86-64 output >>>>> /usr/lib/gcc/x86_64-pc-linux-**gnu/4.5.3/../../../../x86_64-** >>>>> pc-linux-gnu/bin/ld: >>>>> i386 architecture of input file >>>>> >>>>> `./.libs/libvolk_sse3_32.a(**libvolk_sse3_32_la-volk_**machine_sse3_32.o)' >>>>> >>>>> is >>>>> incompatible with i386:x86-64 output >>>>> ./.libs/libvolk_ssse3_32.a(**libvolk_ssse3_32_la-volk_** >>>>> machine_ssse3_32.o): >>>>> In function `volk_32f_s32f_stddev_32f_a_**generic': >>>>> /scratch/jiri/gnuradio/volk/**lib/../include/volk/volk_32f_** >>>>> s32f_stddev_32f_a.h:136: >>>>> undefined reference to `sqrtf' >>>>> ./.libs/libvolk_ssse3_32.a(**libvolk_ssse3_32_la-volk_** >>>>> machine_ssse3_32.o): >>>>> In function `volk_16ic_magnitude_16i_a_**generic': >>>>> /scratch/jiri/gnuradio/volk/**lib/../include/volk/volk_16ic_** >>>>> magnitude_16i_a.h:172: >>>>> undefined reference to `sqrtf' >>>>> >>>>> and many undefined references to atan2f,powf,sincosf, etc. gfollow. >>>>> >>>>> I have gcc (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) 4.5.3 on X86_64 Intel(R) >>>>> Core(TM) i7 system. >>>>> >>>>> Thanks for advices, >>>>> >>>>> Jiri Pittner >>>>> >>>>> >>>>> On Fri, 3 Feb 2012, Jiri Pittner wrote: >>>>> >>>>>> This I did more than 10 times recently, testing also with 3.4.2, > >>>>> carefully deinstalling previously installed versions. It's >>>>> reasonably > >>>>> fast on 4-core machine and as Gentoo user I am used to run some > >>>>> compilations :-). >>>>>> As I wrote I got compilation errors with newer boost versions, I >>>>>> will >>>>>> retry that and report them, since the backtrace shows problem is >>>>>> in > >>>>> boost, so when I am able to compile gnuradio with newer boost it >>>>> might > >>>>> help. >>>>>> Jiri >>>>>>> On Thu, 2 Feb 2012, Marcus D. Leech wrote: >>>>>>>> On 02/02/2012 05:54 PM, Nick Foster wrote: >>>>>>>> Try recompiling gr-uhd and reinstalling. >>>>>>>>> --n >>>>>>>>>>> Might as well re-do the entire Gnu Radio build. It doesn't >>>>> take > > *that* >>>>>>> long. >>>>>>>>> -- >>>>>>> Marcus Leech >>>>>>> Principal Investigator >>>>>>> Shirleys Bay Radio Astronomy Consortium >>>>>>> http://www.sbrac.org >>>>>>>>>>> ______________________________**_________________ >>>>>> Discuss-gnuradio mailing list >>>>>> Discuss-gnuradio@gnu.org >>>>>> >>>>>> https://lists.gnu.org/mailman/**listinfo/discuss-gnuradio<https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>>>>> >>>>>>> >>>>> ______________________________**_________________ >>>>> Discuss-gnuradio mailing list >>>>> Discuss-gnuradio@gnu.org >>>>> >>>>> https://lists.gnu.org/mailman/**listinfo/discuss-gnuradio<https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>>>> >>>>> >>>>> >>>> >>>> ______________________________**_________________ >>>> Discuss-gnuradio mailing list >>>> Discuss-gnuradio@gnu.org >>>> https://lists.gnu.org/mailman/**listinfo/discuss-gnuradio<https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>>> >>>> >>>> >>>> >>> ______________________________**_________________ >>> Discuss-gnuradio mailing list >>> Discuss-gnuradio@gnu.org >>> https://lists.gnu.org/mailman/**listinfo/discuss-gnuradio<https://lists.gnu.org/mailman/listinfo/discuss-gnuradio> >>> >>> >> > > _______________________________________________ > Discuss-gnuradio mailing list > Discuss-gnuradio@gnu.org > https://lists.gnu.org/mailman/listinfo/discuss-gnuradio _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
