On 30/01/12 09:36 PM, Shalabh Jain wrote: > > Hi Tom, > > The max_power.py script runs just fine. However, the problem still > seems to persists in general with other examples. I'm posting the > error while running digital_bert_tx.py below. It exists for the rx > example as well. In fact, with the latest version of gnuradio and uhd, > even the uhd_fft.py as stopped working. This was working previously > and would occasionally error out. Posting the error message below. It > seems the problem is rooted deeper than the top level modules. > > My hardware is USRP2 (rev 4.0) with the XCVR2450 daughterboard. The > host machine is a Dell Optiplex 980. > Software versions are GNURadio (29aa72d4 - downloaded 1/30), UHD > (e30cf4ec - downloaded 1/30), Firmware (003.004.000-322fb97), Ubuntu > (10.04 - 32bit) > > If you need any more information, please let me know. I will try to > debug this further. Please let me know if you have any suggestions in > that direction. > > I'm really sorry for the delayed response. As I mentioned, I got > absorbed into some other work. > > Thanks for your help. > > Shalabh > In the case of uhd_fft.py, what parameters are you passing on the command line?
-- Principal Investigator Shirleys Bay Radio Astronomy Consortium http://www.sbrac.org _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
