On Tue, Jan 17, 2012 at 03:04:10PM -0600, LRK wrote:
> > >
> > > So, the way it works is that it compares the hash on the device to the
> > > hash contained in the appropriate .ihx/.rbf file on the host computer.
> > > If they differ, it reloads. I wonder if the hashes of the .ihx/.rbf
> > > files differ between your two machines?
> >
> > Indeed I think they are different. One is running GnuRadio 3.2.2 from a
> > FreeBSD port and the other the latest git clone. Yours are identical so
> > you would see the two-step load only if you power down the USRP1 between
> > runs. See if loading uhd_rx_nogui.py is different from uhd_fft.py.
>
> Nevermind. Josh beat you to it. Fixed two-step load. Works. Thanks.
Spoke too soon. Worked from power down for uhd_rx_nogui.py but not for
uhd_usrp_probe:
FreeBSD 8; GNU C++ version 4.2.2 20070831 prerelease [FreeBSD]; Boost_104500; UH
D_003.004.000-b071cbc
-- Loading firmware image: /usr/home/gr/gr352/usrp1_fw.ihx... done
Error: LookupError: KeyError: No devices found for ----->
Empty Device Address
gr% uhd_usrp_probe
FreeBSD 8; GNU C++ version 4.2.2 20070831 prerelease [FreeBSD]; Boost_104500; UH
D_003.004.000-b071cbc
-- Opening a USRP1 device...
-- Loading FPGA image: /usr/home/gr/gr352/usrp1_fpga.rbf... done
-- Using FPGA clock rate of 64.000000MHz...
Strange. Still testing....
--
The computer is supposed to work for YOU, not the other way around.
LRK
gr-user . ovillatx.sytes.net
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
