On 09/26/2011 05:36 AM, Tom Rondeau wrote: > On Sun, Sep 25, 2011 at 8:07 AM, Brett L. Trotter <br...@webtrotter.com>wrote: > >> It seems my old patch that zeroed out the output of the USRP didn't make >> it into UHD- we're seeing a constant sine output between packets- and in >> our case this messes with the receiver unless we use some custom TX >> cards that have an amp we can shut down with ATR. >> >> Is there any way to fix this? >> > > I've never noticed this with my work with the UHD. There are various > commands issued to the USRPs to turn it on and shut it off between bursts. > Maybe there's something missing in the gr-uhd. > > On the other hand, Josh and Nick have been working on using tags with gr-uhd > on the transmit side, which should fix your problem. > > Any comments from the UHD folks? >
The usrp1 shutdown mechanism in UHD is a little soft (because there is no inline metadata with the samples). However, if you mark end of burst, then the transmitter should get disabled. You can do this w/ tags using this branch: http://gnuradio.org/cgit/jblum.git/log/?h=mergme/uhd_tags_impl_on_master I would verify that the behavior w/ eob is OK for you on usrp1 by modifying some uhd (non gnuradio) examples before getting into tags. And BTW, I didnt know about this patch. The UHD usrp1 images match the gnuradio ones, so its definitely not in there: http://gnuradio.org/redmine/projects/gnuradio/repository/revisions/4b5e1238492fe40727d19abefe22ae448c720419 It looks like the patch involves verilog changes. Is this an image that you can just build and drop in place of the existing one or does it need host code support? Have you tried it? -Josh _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
