Hi,
I'm using the UCLA ZigBee PHY by Thomas Schmid, with the benchmark
example from gnuradio.
Now I need the signal power of each received packet (at the receiver).
For the signal power computation:
P_S = sum ( all samples squared ) divided by number of samples
but the problem is where to fetch these samples, and how to make sure,
that only samples of the received packet are considered, and no noise...
1. is there a gnuradio block/function which would already perform this
task of received signal power computation, or RSSI determination,
which I could use/edit for my task?
2. If not, where would be the best spot to capture the received
samples? As the clock_recovery looks to be too late, and capturing the
packets earlier makes it hard to distinguish between noise and
received signal, as no clock recovery nor packet detection is
performed, yet.
I'd appreciate any help, thanks in advanced!
Quoting "Josh Blum" <j...@joshknows.com>:
On 09/01/2011 11:55 PM, patiljagdish154 wrote:
hi , i am working on GNURadio since long time . can anyone tell me how to
change the look of GRC .
is it possible through *.xml file ?
thanks..
most of those setting are in here
http://gnuradio.org/cgit/jblum.git/tree/grc/gui/Colors.py
http://gnuradio.org/cgit/jblum.git/tree/grc/gui/Constants.py
-josh
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
