I am using USRP with RFX2400. Was trying with benchmark_tx and benchmark_rx I connected RFX board to the B side of transmiter USRP and connected RFX board to the A side of receiver USRP. For connection I used SMA-SMA connector. With the help file I understood almost everything but how to specify the transmitter and receiver ports i.e. I connected SMA to TX/RX of transmitter (side B in USRP ) then is the following command correct ..... ./benchmark_tx.py -f 2.45G --tx-amplitude=0.5 -v --show-tx-gain-range -T B And for receiver part I connected SMA to RX2 (side A of USRP) then is the following command correct..... ./benchmark_rx.py -f 2.45G -v --show-rx-gain-range -R A
With these commands nothing happens at the receiver end.....I would like to know what things I missed/misunderstood :) I was playing well with the basix TX and Rx daughter boards but getting problems with RFX. ----- Sumit Kr. Research Assistant Communication Research center IIIT Hyderabad India -- View this message in context: http://old.nabble.com/Problem-with-arguments-in-benchmark_tx-and-rx-tp32381731p32381731.html Sent from the GnuRadio mailing list archive at Nabble.com. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
