There are two more things I am not clear with.
> >
> > I understand that the FPGA and firmware images have to be updated, i.e. the
> > newest images downloaded and "flashed" on the SD card in case of USRP2.
> > However, since the source code is new too, should I rebuild and reinstall
> > the UHD from the new source?
> >
>
> The host code and images must match. If you want to use the latest
> images, you have to download and install the latest UHD host code as
> well. http://code.ettus.com/redmine/ettus/projects/uhd/wiki#Source-code
1. Why must code and images match? If FPGA image is newer than the UHD code one
have installed, according to my logic only things that are different would not
work.
2. I want to adjust the FPGA image slightly. I want to write some extra
Verilog code and build it myself with Xilinx. However, since I change the image
on the FPGA, and the installed UHD code has to match to the image, how can this
work?
Thank you in advance.
Nemanja
_______________________________________________
Discuss-gnuradio mailing list
Discuss-gnuradio@gnu.org
https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
