Hello, I'm trying to use a recently purchased DBSRX2 + USRP1 combination. Although the board shows some signs of life, it's difficult to make sense of the fft spectrum. In investigating, I found that the daughterboard id does not seem to be correct. In particular, the gnuradio software reports dbid = 18 rather than the expected 2 or possibly 13 (all numbers decimal).
This result does not depend on the particular module I run. Below I show the simplest example (usrp_print_db.py). Please see the source and result below. Any suggestions would be greatly appreciated. Sincerely, Prachi Parihar pparihar@phy-gnuradio:~$ python usrp_print_db.py Warning: Treating daughterboard with invalid EEPROM contents as if it were a "Basic Rx." Warning: This is almost certainly wrong... Use appropriate burn-*-eeprom utility. Daughterboard Id: 18 RX d'board A: Unknown (0x0012) ***************************** #!/usr/bin/env python from gnuradio import gr from gnuradio import usrp from usrpm import usrp_dbid u_source = usrp.source_c() subdev = usrp.selected_subdev(u_source, (0,0)) print "Daughterboard Id:", u_source.daughterboard_id(0) print "RX d'board %s" % (subdev.side_and_name(),)
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
