Hi all, I was setting one of our N210 we got last week, while flushing the firmware the procedure (normaly it takes one second) stopped this way:
USRP-N2XX found. Flash size: 4194304 Sector size: 65536 Begin firmware write: this should take about 1 second... Erasing 31744 bytes at 3145728 nothing for over few minutes, I did a CTRL-C and this time worked: USRP-N2XX found. Flash size: 4194304 Sector size: 65536 Begin firmware write: this should take about 1 second... Erasing 31744 bytes at 3145728 Writing image Verifying data Read back 16383 bytes Success. Time elapsed: 1.200541 seconds for the fpga part it didn't work and it stops (I waited like 10 mins) this way: USRP-N2XX found. Flash size: 4194304 Sector size: 65536 Begin FPGA write: this should take about 1 minute... Erasing 1572864 bytes at 1572864 After around 10 mins I did a CTRL-C repeated again (as i did with the firmware but it didn't work). The device now doesn't reboot (all leds are off) and performing the recovery procedure (keeping pressed the S2 while power cycling) doesn't lead to anything, all led are still off. Any suggestion? Shall I send it back ? Regards Gaetano -- cpp-today.blogspot.com _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
