Since I don't have much experience running wxPython I'll leave it to someone more knowledgeable for commenting. In regards to the configuration you'll have to be more specific about your issue ... is it that you want to build usrp1 module and it's not building or is it some other component? I like to use the "--enable-name-of-component" flag in the configuration step so configuration would fail when the missing dependency is discovered this way we can help you address that missing dependency.
Though if you're issue is building the usrp module then you should be using the UHD driver. al fayez -----Original Message----- From: Christopher Dean <christopher.d...@ll.mit.edu> To: discuss-gnuradio <discuss-gnuradio@gnu.org> Sent: Fri, Jul 1, 2011 9:06 am Subject: [Discuss-gnuradio] Building GNU Radio/GRC on the E100 Hi All, I am currently trying to build GNU Radio for my E100, including GRC. In the process, I've run into a few issues: - We don't have wxPython in the opkg repository. This is needed to use flowgraphs in GRC, and although there is a text interface, the flowgraph interface would be ideal. I saw that somebody had actually managed to get flowgraphs in GRC on the E100, despite this. How would I go about doing that? - After the ./configure step, I received the following (see appended) list of components that are going to be skipped. In the ./configure call, I disable volk, usrp2, usrp1, and gr-video-sdl. The list that is output is much longer, but is it correct? I haven't actually seen this documented anywhere. - GRC still is not showing up as successfully configured. I've followed the steps listed here (http://ettus-apps.sourcerepo.com/redmine/ettus/projects/usrpe1xx/wiki/FAQ#How-can-I-build-UHD-and-GNU-Radio-from-source) and verified that I had all of the dependencies (excluding wxPython and xmlto) listed here (http://gnuradio.org/redmine/projects/gnuradio/repository/revisions/master/entry/README). How do I fix this? Thank you very much for your help. Best, Chris Appendix: Configuration Output ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: usrp2-firmware These components will not be built. ********************************************************************* The following GNU Radio components have been successfully configured: config gruel gnuradio-core gr-msdd6000 gr-audio gr-atsc gr-cvsd-vocoder gr-gsm-fr-vocoder gr-noaa gr-pager gr-radio-astronomy gr-trellis gnuradio-examples gr-uhd docs You my now run the make command to build these components. ********************************************************************* The following components were skipped either because you asked not to build them or they didn't pass configuration checks: volk gcell usrp usrp2 gr-usrp gr-usrp2 gr-gcell gr-comedi gr-gpio gr-radar-mono gr-video-sdl gr-wxgui gr-qtgui gr-sounder gr-utils grc These components will not be built. Configured GNU Radio release v3.4.0-3-g9bf36359 for build. _______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
