> > > >> On your USRP1 issue. I found some reset registers that weren't being >> poked in UHD that were poked by gnuradio-usrp. The change didnt seem to >> harm anything for me. Does this help with any of the flakiness you see? >> >> http://ettus-apps.sourcerepo.com/redmine/ettus/projects/uhd/repository/show?rev=usrp1_init_resets >> >> Thanks, >> -Josh >> > > (MD) OK, I will give a shot later. Please note that the flakiness is on > both USRP1 and E100 whenever I use UHD. To recap and add a little more > detail, the problem is that: > > A: Restarting my app often gives me unrecognizable/dirty rx samples. Once I > get a clean signal, it seems to stay that way until I happen to restart my > app. > B: UHD config calls sometimes hang and I have to power cycle. > > Thanks for your support. > > Michael > Mixed results. The bad: It made things worse in that, for dual channel rx, I can get a clean signal for only once after power cycle -- it never gives me a good signal if I restart my app. (For single channel rx, it restarts fine.) The good: I haven't encountered a hang during my brief test, so it's possible the hang problem may have been mitigated with the patch.
Michael
_______________________________________________ Discuss-gnuradio mailing list Discuss-gnuradio@gnu.org https://lists.gnu.org/mailman/listinfo/discuss-gnuradio
